Product Description
The rings and balls of all-ceramic deep groove ball bearings are made of silicon nitride (Si3N4) ceramic material. This bearing can be designed as a full ball or with PTFE, PEEK or stainless steel 304/316 cage. PTFE is the default standard cage.
Full ceramic deep groove ball bearings have the characteristics of non-magnetic and electrical insulation, wear-resistant and corrosion-resistant, oil-free and self-lubricating, high temperature and cold resistance, and can be used in extremely harsh environments and special working conditions. It can be used in high temperature environment above 400ºC under the condition of full ball or equipped with stainless steel 316 cage. The PEEK cage can also be used at temperatures above 250°C. For CZPT temperatures (for example, lower than -70°C), full ceramic bearings with PTFE cages or stainless steel 316 cages can be used. Normally, the normal radial clearance is C0. When it is necessary to adapt to the extreme environment, other clearances can be customized.
| model | size(mm) | Installation size (mm) | weight | weight | ||||||
| da | Da | ra | (kg) | (kg) | ||||||
| d | D | B | r(min) | r1(min) | min | max | max | ZrO2 | Si3N4 | |
| 7900 | 10 | 22 | 6 | 0.3 | 0.15 | 12.5 | 19.5 | 0.3 | 0.007 | 0.0038 |
| 7000 | 26 | 8 | 0.3 | 0.15 | 12.5 | 23.5 | 0.3 | 0.014 | 0.0075 | |
| 7200 | 30 | 9 | 0.6 | 0.3 | 15 | 25 | 0.6 | 0.571 | 0.013 | |
| 7300 | 35 | 11 | 0.6 | 0.3 | 15 | 30 | 0.6 | 0.04 | 0.571 | |
| 7901 | 12 | 24 | 6 | 0.3 | 0.15 | 14.5 | 21.5 | 0.3 | 0.008 | 0.0042 |
| 7001 | 28 | 8 | 0.3 | 0.15 | 14.5 | 25.5 | 0.3 | 0.017 | 0.0092 | |
| 7201 | 32 | 10 | 0.6 | 0.3 | 17 | 27 | 0.6 | 0.571 | 0.015 | |
| 7301 | 37 | 12 | 1 | 0.6 | 18 | 31 | 1 | 0.046 | 0.571 | |
| 7902 | 15 | 28 | 7 | 0.3 | 0.15 | 17.5 | 25.5 | 0.3 | 0.012 | 0.0063 |
| 7002 | 32 | 9 | 0.3 | 0.15 | 17.5 | 29.5 | 0.3 | 0.571 | 0.013 | |
| 7202 | 35 | 11 | 0.6 | 0.3 | 20 | 30 | 0.3 | 0.035 | 0.019 | |
| 7302 | 42 | 13 | 1 | 0.6 | 21 | 36 | 1 | 0.064 | 0.035 | |
| 7903 | 17 | 30 | 7 | 0.3 | 0.15 | 19.5 | 27.5 | 0.3 | 0.013 | 0.0071 |
| 7003 | 35 | 10 | 0.3 | 0.15 | 19.5 | 32.5 | 0.3 | 0.032 | 0.017 | |
| 7203 | 40 | 12 | 0.6 | 0.3 | 22 | 35 | 0.6 | 0.052 | 0.571 | |
| 7303 | 47 | 14 | 1 | 0.6 | 23 | 41 | 1 | 0.087 | 0.047 | |
| 7904 | 20 | 37 | 9 | 0.3 | 0.15 | 22.5 | 34.5 | 0.3 | 0.571 | 0.015 |
| 7004 | 42 | 12 | 0.6 | 0.3 | 25 | 37 | 0.6 | 0.052 | 0.571 | |
| 7204 | 47 | 14 | 1 | 0.6 | 26 | 41 | 1 | 0.082 | 0.045 | |
| 7304 | 52 | 15 | 1.1 | 0.6 | 27 | 45 | 1 | 0.11 | 0.06 | |
| 7905 | 25 | 42 | 9 | 0.3 | 0.15 | 27.5 | 39.5 | 0.3 | 0.032 | 0.018 |
| 7005 | 47 | 12 | 0.6 | 0.3 | 30 | 42 | 0.6 | 0.061 | 0.033 | |
| 7205 | 52 | 15 | 1 | 0.6 | 31 | 46 | 1 | 0.099 | 0.054 | |
| 7305 | 62 | 17 | 1.1 | 0.6 | 32 | 55 | 1 | 0.18 | 0.098 | |
| 7906 | 30 | 47 | 9 | 0.3 | 0.15 | 32.5 | 44.5 | 1 | 0.04 | 0.571 |
| 7006 | 55 | 13 | 1 | 0.6 | 36 | 49 | 1 | 0.089 | 0.048 | |
| 7206 | 62 | 16 | 1 | 0.6 | 36 | 56 | 1 | 0.15 | 0.083 | |
| 7306 | 72 | 19 | 1.1 | 0.6 | 37 | 65 | 1 | 0.27 | 0.14 | |
| 7907 | 35 | 55 | 10 | 0.6 | 0.3 | 40 | 50 | 0.6 | 0.058 | 0.031 |
| 7007 | 62 | 14 | 1 | 0.6 | 41 | 56 | 1 | 0.12 | 0.063 | |
| 7207 | 72 | 17 | 1.1 | 0.6 | 42 | 65 | 1 | 0.22 | 0.12 | |
| 7307 | 80 | 21 | 1.5 | 1 | 44 | 71 | 1.5 | 0.36 | 0.19 | |
| 7908 | 40 | 62 | 12 | 0.6 | 0.3 | 45 | 57 | 0.6 | 0.09 | 0.05 |
| 7008 | 68 | 15 | 1 | 0.6 | 46 | 62 | 1 | 0.15 | 0.08 | |
| 7208 | 80 | 18 | 1.1 | 0.6 | 47 | 73 | 1 | 0.28 | 0.15 | |
| 7308 | 90 | 23 | 1.5 | 1 | 49 | 81 | 1.5 | 0.49 | 0.27 | |
| 7909 | 45 | 68 | 12 | 0.6 | 0.3 | 50 | 63 | 0.6 | 0.097 | 0.053 |
| 7009 | 75 | 16 | 1 | 0.6 | 51 | 69 | 1 | 0.19 | 0.1 | |
| 7209 | 85 | 19 | 1.1 | 0.6 | 52 | 78 | 1 | 0.32 | 0.175 | |
| 7309 | 100 | 25 | 1.5 | 1 | 54 | 91 | 1.5 | 0.64 | 0.345 | |
| 7910 | 50 | 72 | 12 | 0.6 | 0.3 | 55 | 67 | 0.6 | 0.1 | 0.06 |
| 7571 | 80 | 16 | 1 | 0.6 | 56 | 74 | 1 | 0.2 | 0.11 | |
| 7210 | 90 | 20 | 1.1 | 0.6 | 57 | 83 | 1 | 0.35 | 0.19 | |
| 7310 | 110 | 27 | 2 | 1 | 60 | 100 | 2 | 0.82 | 0.44 | |
| 7911 | 55 | 80 | 13 | 1 | 0.6 | 61 | 74 | 1 | 0.15 | 0.08 |
| 7011 | 90 | 18 | 1.1 | 0.6 | 62 | 83 | 1 | 0.29 | 0.16 | |
| 7211 | 100 | 21 | 1.5 | 1 | 64 | 91 | 1.5 | 0.48 | 0.26 | |
| 7311 | 120 | 29 | 2 | 1 | 65 | 110 | 2 | 1.05 | 0.57 | |
| 7912 | 60 | 85 | 13 | 1 | 0.6 | 66 | 79 | 1 | 0.15 | 0.08 |
| 7012 | 95 | 18 | 1.1 | 0.6 | 67 | 88 | 1 | 0.32 | 0.17 | |
| 7212 | 110 | 22 | 1.5 | 1 | 69 | 101 | 1.5 | 0.6 | 0.33 | |
| 7312 | 130 | 31 | 2.1 | 1.1 | 72 | 118 | 2 | 1.32 | 0.72 | |
| 7913 | 65 | 90 | 13 | 1 | 0.6 | 71 | 84 | 1 | 0.17 | 0.09 |
| 7013 | 100 | 18 | 1.1 | 0.6 | 72 | 93 | 1 | 0.34 | 0.18 | |
| 7213 | 120 | 23 | 1.5 | 1 | 74 | 111 | 1.5 | 0.77 | 0.42 | |
| 7313 | 140 | 33 | 2.1 | 1.1 | 77 | 128 | 2 | 1.62 | 0.88 | |
| 7914 | 70 | 100 | 16 | 1 | 0.6 | 76 | 94 | 1 | 0.27 | 0.15 |
| 7014 | 110 | 20 | 1.1 | 0.6 | 77 | 103 | 1 | 0.47 | 0.25 | |
| 7214 | 125 | 24 | 1.5 | 1 | 79 | 116 | 1.5 | 0.84 | 0.45 | |
| 7314 | 150 | 35 | 2.1 | 1.1 | 82 | 138 | 2 | 1.98 | 1.07 | |
| 7915 | 75 | 105 | 16 | 1 | 0.6 | 81 | 99 | 1 | 0.28 | 0.15 |
| 7015 | 115 | 20 | 1.1 | 0.6 | 82 | 108 | 1 | 0.5 | 0.27 | |
| 7215 | 130 | 25 | 1.5 | 1 | 84 | 121 | 1.5 | 0.92 | 0.5 | |
| 7916 | 80 | 110 | 16 | 1 | 0.6 | 86 | 104 | 1 | 0.3 | 0.16 |
| 7016 | 125 | 22 | 1.1 | 0.6 | 87 | 118 | 1 | 0.67 | 0.36 | |
| 7216 | 140 | 26 | 2 | 1 | 90 | 130 | 2 | 1.09 | 0.59 | |
| 7017 | 85 | 130 | 22 | 1.1 | 0.6 | 92 | 123 | 1 | 0.71 | 0.38 |
| 7217 | 150 | 28 | 2 | 1 | 95 | 140 | 2 | 1.35 | 0.73 | |
| 7918 | 90 | 125 | 18 | 1.1 | 0.6 | 97 | 118 | 1 | 0.45 | 0.24 |
| 7018 | 140 | 24 | 1.5 | 1 | 99 | 131 | 1.5 | 0.92 | 0.5 | |
| 7919 | 95 | 130 | 18 | 1.1 | 0.6 | 102 | 123 | 1 | 0.46 | 0.25 |
| 7019 | 145 | 24 | 1.5 | 1 | 104 | 136 | 1.5 | 0.95 | 0.51 | |
| 7920 | 100 | 140 | 20 | 1.1 | 0.6 | 107 | 133 | 1 | 0.64 | 0.35 |
| 7571 | 150 | 24 | 1.5 | 1 | 109 | 141 | 1.5 | 0.99 | 0.54 | |
| 7921 | 105 | 145 | 20 | 1.1 | 0.6 | 112 | 138 | 1 | 0.66 | 0.36 |
| 7922 | 110 | 150 | 20 | 1.1 | 0.6 | 117 | 143 | 1 | 0.69 | 0.37 |
About us
ZheJiang REET BEARING.CO.,LTD is a professional bearing manufacturer and exporter.
We have a wealth of technical.All producing processes are finished in our manufactory. As an ISO9001:2000 certified manufacturer,we will solve various problems in application and use of our bearings.
Our company is an authorized distributor of FAG, INA, CZPT and other world brand bearings.Our company has the right to self-export bearings and launches its own brand RTB.
Our bearing had been exported to more than 20 countries worldwide and are warmly welcomed.
We are looking forward to your order.
FAQ
1.Is the company a production factory or a trading company?
ZheJiang REET BEARING CO.,LTD is a manufacturing enterprise focusing on bearings and integrating research, production and sales.
2.How many the MOQ of your company?
Depending on the size of the bearing, the MOQ is variable, if you are interested, you can contact me for a quote.
3.Does the company accept OEM or customized bearings?
In addition to standard products, we also supply non-standard and modified standard products for special application. Meanwhile, we provide OEM service.
4.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.
5.What are the company’s delivery terms?
We can accept EXW,FOB,CFR,CIF,etc. You can choose the 1 which is the most convenient cost effective for you.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 15° |
|---|---|
| Aligning: | Aligning Bearing |
| Separated: | Separated |
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Ceramic |
| Samples: |
US$ 2/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is the role of cage design and materials in plastic bearing performance and durability?
The role of cage design and materials in plastic bearing performance and durability is significant. Here’s a detailed explanation:
- 1. Guidance and Retention:
The primary role of a cage in a plastic bearing is to guide and retain the rolling elements, such as balls or rollers. The cage holds the rolling elements in position, ensuring proper spacing and alignment within the bearing. This guidance and retention function is crucial for maintaining smooth and efficient operation, preventing contact between rolling elements, and distributing loads evenly. The cage design plays a critical role in achieving optimal performance and durability by providing effective guidance and retention of the rolling elements.
- 2. Load Distribution:
The cage design and materials contribute to the load distribution within the bearing. The cage helps distribute the applied loads evenly to the rolling elements, preventing excessive stress on individual elements and minimizing the risk of premature failure. An efficient cage design ensures that the load is shared appropriately among the rolling elements, maximizing the bearing’s load-carrying capacity and enhancing its durability.
- 3. Friction and Heat Generation:
The cage design and materials also influence the friction and heat generation within the bearing. A well-designed cage minimizes friction between the rolling elements and the cage itself, reducing energy losses and heat generation. Additionally, the choice of cage material can impact the coefficient of friction and thermal conductivity. Optimal cage materials with low friction and good thermal properties can contribute to improved performance, lower operating temperatures, and increased durability of the plastic bearing.
- 4. Lubricant Retention:
Certain cage designs are specifically engineered to assist in lubricant retention within the bearing. The cage structure can create pockets or reservoirs that hold and distribute lubricating oil or grease to the rolling elements. This ensures a continuous and adequate supply of lubrication, reducing friction, wear, and the risk of premature failure. Proper lubricant retention facilitated by the cage design is essential for maintaining the performance and durability of plastic bearings.
- 5. Resistance to Harsh Environments:
The choice of cage material is crucial for ensuring the resistance of plastic bearings to harsh operating environments. Different cage materials offer varying degrees of resistance to chemicals, moisture, temperature extremes, and other environmental factors. Selecting the appropriate cage material that is compatible with the application’s operating conditions is essential to maintain the bearing’s performance and durability over time.
- 6. Durability and Service Life:
The cage design and materials significantly impact the overall durability and service life of plastic bearings. A well-designed cage that effectively guides and retains the rolling elements, distributes loads evenly, minimizes friction, and retains lubrication contributes to the bearing’s longevity. Additionally, using durable and suitable cage materials that can withstand the operating conditions ensures the bearing’s ability to withstand wear, fatigue, and other forms of degradation, resulting in extended service life.
In summary, the cage design and materials play a crucial role in the performance and durability of plastic bearings. The cage provides guidance, retention, and load distribution for the rolling elements, minimizes friction and heat generation, assists in lubricant retention, ensures resistance to harsh environments, and contributes to the overall durability and service life of the bearing. By considering the appropriate cage design and materials, manufacturers can optimize the performance, reliability, and longevity of plastic bearings in various applications.
What is the impact of proper lubrication on the performance and lifespan of plastic bearings?
Proper lubrication plays a significant role in the performance and lifespan of plastic bearings. Here’s a detailed explanation of the impact of proper lubrication:
- 1. Reduced Friction and Wear:
Proper lubrication helps reduce friction and wear in plastic bearings. Lubricants create a thin film of lubrication between the bearing surfaces, minimizing direct contact and friction. This reduces the heat generated during operation and prevents excessive wear on the bearing materials. By reducing friction and wear, proper lubrication contributes to improved performance, efficiency, and extended lifespan of plastic bearings.
- 2. Heat Dissipation:
Lubrication helps dissipate heat generated during the operation of plastic bearings. The lubricant absorbs and carries away heat from the bearing surfaces, preventing overheating and potential damage. Proper heat dissipation through lubrication ensures that the bearing operates within its optimum temperature range, promoting reliable performance and preventing premature failure due to excessive heat buildup.
- 3. Corrosion Protection:
Proper lubrication provides corrosion protection for plastic bearings. Lubricants form a protective barrier on the bearing surfaces, preventing moisture and contaminants from coming into direct contact with the bearing materials. This helps prevent corrosion and degradation of the bearing surfaces, ensuring their long-term functionality and extending the lifespan of the plastic bearings.
- 4. Noise Reduction:
Adequate lubrication contributes to noise reduction in plastic bearings. The lubricant helps dampen vibrations and reduce the impact of metal-to-metal contact, resulting in quieter operation. By minimizing noise generation, proper lubrication enhances the overall user experience, reduces noise pollution, and contributes to a more comfortable working environment.
- 5. Contaminant Exclusion:
Lubrication helps exclude contaminants from entering the bearing system. The lubricant forms a protective barrier that prevents dust, dirt, and other particles from reaching the bearing surfaces. This is particularly important for plastic bearings, as contaminants can cause abrasion, increase friction, and lead to premature wear. Proper lubrication ensures the integrity of the bearing system by keeping it clean and free from harmful particles.
- 6. Maintenance and Reliability:
Proper lubrication is essential for the maintenance and reliability of plastic bearings. Regular lubrication maintenance helps monitor the condition of the bearings, identify potential issues, and take appropriate preventive measures. Additionally, lubrication intervals and quantities should be adhered to as recommended by the bearing manufacturer. Proper lubrication maintenance ensures the continuous and reliable operation of plastic bearings, minimizing downtime and costly repairs.
In summary, proper lubrication has a significant impact on the performance and lifespan of plastic bearings. It reduces friction and wear, dissipates heat, provides corrosion protection, reduces noise, excludes contaminants, and ensures maintenance and reliability. Following manufacturer guidelines and implementing a proper lubrication regimen is essential for optimizing the performance, efficiency, and longevity of plastic bearings.
What are the common types of plastic materials used for plastic bearings, such as PTFE or nylon?
Plastic bearings can be made from various types of plastic materials, each offering unique properties and advantages. Here are some common types of plastic materials used for plastic bearings:
- 1. PTFE (Polytetrafluoroethylene):
PTFE is a widely used plastic material for bearings due to its excellent low friction and self-lubricating properties. PTFE bearings have a low coefficient of friction, which reduces wear and energy consumption. They can operate without additional lubrication, making them suitable for applications where lubrication is challenging or undesirable. PTFE bearings also have high chemical resistance and can withstand a wide temperature range.
- 2. Nylon (Polyamide):
Nylon is another common plastic material used for bearings. It offers good wear resistance, low friction, and high strength. Nylon bearings can handle moderate loads and have self-lubricating properties. They are also resistant to chemicals and have excellent dimensional stability. Nylon bearings are often used in applications such as conveyor systems, automotive components, and machinery.
- 3. POM (Polyoxymethylene):
POM, also known as acetal or Delrin, is a versatile engineering plastic used in bearings. POM bearings have low friction, high wear resistance, and good dimensional stability. They exhibit excellent strength and stiffness, making them suitable for applications with moderate loads. POM bearings are often used in industries such as automotive, electronics, and consumer goods.
- 4. UHMWPE (Ultra-High Molecular Weight Polyethylene):
UHMWPE is a plastic material known for its exceptional wear resistance and impact strength. UHMWPE bearings can withstand heavy loads, have a low coefficient of friction, and offer good chemical resistance. They are often used in applications where high abrasion resistance and durability are required, such as in material handling equipment, conveyor systems, and agricultural machinery.
- 5. PEEK (Polyetheretherketone):
PEEK is a high-performance plastic material with excellent mechanical properties and temperature resistance. PEEK bearings can operate at high temperatures, making them suitable for applications in demanding environments. They offer low friction, good chemical resistance, and high strength. PEEK bearings are commonly used in aerospace, automotive, and medical applications.
These are just a few examples of the plastic materials used for plastic bearings. Other plastic materials, such as polyimide, PPS (polyphenylene sulfide), or PVDF (polyvinylidene fluoride), can also be used depending on the specific application requirements. The choice of plastic material for a plastic bearing depends on factors such as load capacity, temperature range, chemical compatibility, and friction characteristics.
editor by CX 2024-05-07
China Standard Thin Section/Auto Wheelengine/Auto/Square Bore/Needle Roller/Thrust Ball/Roller/ Taper Roller/Forklift Truck/Hybrid Ceramic Ball/Plastic Bearing/China Whole7018 bearing air
Product Description
The rings and balls of all-ceramic deep groove ball bearings are made of silicon nitride (Si3N4) ceramic material. This bearing can be designed as a full ball or with PTFE, PEEK or stainless steel 304/316 cage. PTFE is the default standard cage.
Full ceramic deep groove ball bearings have the characteristics of non-magnetic and electrical insulation, wear-resistant and corrosion-resistant, oil-free and self-lubricating, high temperature and cold resistance, and can be used in extremely harsh environments and special working conditions. It can be used in high temperature environment above 400ºC under the condition of full ball or equipped with stainless steel 316 cage. The PEEK cage can also be used at temperatures above 250°C. For CZPT temperatures (for example, lower than -70°C), full ceramic bearings with PTFE cages or stainless steel 316 cages can be used. Normally, the normal radial clearance is C0. When it is necessary to adapt to the extreme environment, other clearances can be customized.
| model | size(mm) | Installation size (mm) | weight | weight | ||||||
| da | Da | ra | (kg) | (kg) | ||||||
| d | D | B | r(min) | r1(min) | min | max | max | ZrO2 | Si3N4 | |
| 7900 | 10 | 22 | 6 | 0.3 | 0.15 | 12.5 | 19.5 | 0.3 | 0.007 | 0.0038 |
| 7000 | 26 | 8 | 0.3 | 0.15 | 12.5 | 23.5 | 0.3 | 0.014 | 0.0075 | |
| 7200 | 30 | 9 | 0.6 | 0.3 | 15 | 25 | 0.6 | 0.571 | 0.013 | |
| 7300 | 35 | 11 | 0.6 | 0.3 | 15 | 30 | 0.6 | 0.04 | 0.571 | |
| 7901 | 12 | 24 | 6 | 0.3 | 0.15 | 14.5 | 21.5 | 0.3 | 0.008 | 0.0042 |
| 7001 | 28 | 8 | 0.3 | 0.15 | 14.5 | 25.5 | 0.3 | 0.017 | 0.0092 | |
| 7201 | 32 | 10 | 0.6 | 0.3 | 17 | 27 | 0.6 | 0.571 | 0.015 | |
| 7301 | 37 | 12 | 1 | 0.6 | 18 | 31 | 1 | 0.046 | 0.571 | |
| 7902 | 15 | 28 | 7 | 0.3 | 0.15 | 17.5 | 25.5 | 0.3 | 0.012 | 0.0063 |
| 7002 | 32 | 9 | 0.3 | 0.15 | 17.5 | 29.5 | 0.3 | 0.571 | 0.013 | |
| 7202 | 35 | 11 | 0.6 | 0.3 | 20 | 30 | 0.3 | 0.035 | 0.019 | |
| 7302 | 42 | 13 | 1 | 0.6 | 21 | 36 | 1 | 0.064 | 0.035 | |
| 7903 | 17 | 30 | 7 | 0.3 | 0.15 | 19.5 | 27.5 | 0.3 | 0.013 | 0.0071 |
| 7003 | 35 | 10 | 0.3 | 0.15 | 19.5 | 32.5 | 0.3 | 0.032 | 0.017 | |
| 7203 | 40 | 12 | 0.6 | 0.3 | 22 | 35 | 0.6 | 0.052 | 0.571 | |
| 7303 | 47 | 14 | 1 | 0.6 | 23 | 41 | 1 | 0.087 | 0.047 | |
| 7904 | 20 | 37 | 9 | 0.3 | 0.15 | 22.5 | 34.5 | 0.3 | 0.571 | 0.015 |
| 7004 | 42 | 12 | 0.6 | 0.3 | 25 | 37 | 0.6 | 0.052 | 0.571 | |
| 7204 | 47 | 14 | 1 | 0.6 | 26 | 41 | 1 | 0.082 | 0.045 | |
| 7304 | 52 | 15 | 1.1 | 0.6 | 27 | 45 | 1 | 0.11 | 0.06 | |
| 7905 | 25 | 42 | 9 | 0.3 | 0.15 | 27.5 | 39.5 | 0.3 | 0.032 | 0.018 |
| 7005 | 47 | 12 | 0.6 | 0.3 | 30 | 42 | 0.6 | 0.061 | 0.033 | |
| 7205 | 52 | 15 | 1 | 0.6 | 31 | 46 | 1 | 0.099 | 0.054 | |
| 7305 | 62 | 17 | 1.1 | 0.6 | 32 | 55 | 1 | 0.18 | 0.098 | |
| 7906 | 30 | 47 | 9 | 0.3 | 0.15 | 32.5 | 44.5 | 1 | 0.04 | 0.571 |
| 7006 | 55 | 13 | 1 | 0.6 | 36 | 49 | 1 | 0.089 | 0.048 | |
| 7206 | 62 | 16 | 1 | 0.6 | 36 | 56 | 1 | 0.15 | 0.083 | |
| 7306 | 72 | 19 | 1.1 | 0.6 | 37 | 65 | 1 | 0.27 | 0.14 | |
| 7907 | 35 | 55 | 10 | 0.6 | 0.3 | 40 | 50 | 0.6 | 0.058 | 0.031 |
| 7007 | 62 | 14 | 1 | 0.6 | 41 | 56 | 1 | 0.12 | 0.063 | |
| 7207 | 72 | 17 | 1.1 | 0.6 | 42 | 65 | 1 | 0.22 | 0.12 | |
| 7307 | 80 | 21 | 1.5 | 1 | 44 | 71 | 1.5 | 0.36 | 0.19 | |
| 7908 | 40 | 62 | 12 | 0.6 | 0.3 | 45 | 57 | 0.6 | 0.09 | 0.05 |
| 7008 | 68 | 15 | 1 | 0.6 | 46 | 62 | 1 | 0.15 | 0.08 | |
| 7208 | 80 | 18 | 1.1 | 0.6 | 47 | 73 | 1 | 0.28 | 0.15 | |
| 7308 | 90 | 23 | 1.5 | 1 | 49 | 81 | 1.5 | 0.49 | 0.27 | |
| 7909 | 45 | 68 | 12 | 0.6 | 0.3 | 50 | 63 | 0.6 | 0.097 | 0.053 |
| 7009 | 75 | 16 | 1 | 0.6 | 51 | 69 | 1 | 0.19 | 0.1 | |
| 7209 | 85 | 19 | 1.1 | 0.6 | 52 | 78 | 1 | 0.32 | 0.175 | |
| 7309 | 100 | 25 | 1.5 | 1 | 54 | 91 | 1.5 | 0.64 | 0.345 | |
| 7910 | 50 | 72 | 12 | 0.6 | 0.3 | 55 | 67 | 0.6 | 0.1 | 0.06 |
| 7571 | 80 | 16 | 1 | 0.6 | 56 | 74 | 1 | 0.2 | 0.11 | |
| 7210 | 90 | 20 | 1.1 | 0.6 | 57 | 83 | 1 | 0.35 | 0.19 | |
| 7310 | 110 | 27 | 2 | 1 | 60 | 100 | 2 | 0.82 | 0.44 | |
| 7911 | 55 | 80 | 13 | 1 | 0.6 | 61 | 74 | 1 | 0.15 | 0.08 |
| 7011 | 90 | 18 | 1.1 | 0.6 | 62 | 83 | 1 | 0.29 | 0.16 | |
| 7211 | 100 | 21 | 1.5 | 1 | 64 | 91 | 1.5 | 0.48 | 0.26 | |
| 7311 | 120 | 29 | 2 | 1 | 65 | 110 | 2 | 1.05 | 0.57 | |
| 7912 | 60 | 85 | 13 | 1 | 0.6 | 66 | 79 | 1 | 0.15 | 0.08 |
| 7012 | 95 | 18 | 1.1 | 0.6 | 67 | 88 | 1 | 0.32 | 0.17 | |
| 7212 | 110 | 22 | 1.5 | 1 | 69 | 101 | 1.5 | 0.6 | 0.33 | |
| 7312 | 130 | 31 | 2.1 | 1.1 | 72 | 118 | 2 | 1.32 | 0.72 | |
| 7913 | 65 | 90 | 13 | 1 | 0.6 | 71 | 84 | 1 | 0.17 | 0.09 |
| 7013 | 100 | 18 | 1.1 | 0.6 | 72 | 93 | 1 | 0.34 | 0.18 | |
| 7213 | 120 | 23 | 1.5 | 1 | 74 | 111 | 1.5 | 0.77 | 0.42 | |
| 7313 | 140 | 33 | 2.1 | 1.1 | 77 | 128 | 2 | 1.62 | 0.88 | |
| 7914 | 70 | 100 | 16 | 1 | 0.6 | 76 | 94 | 1 | 0.27 | 0.15 |
| 7014 | 110 | 20 | 1.1 | 0.6 | 77 | 103 | 1 | 0.47 | 0.25 | |
| 7214 | 125 | 24 | 1.5 | 1 | 79 | 116 | 1.5 | 0.84 | 0.45 | |
| 7314 | 150 | 35 | 2.1 | 1.1 | 82 | 138 | 2 | 1.98 | 1.07 | |
| 7915 | 75 | 105 | 16 | 1 | 0.6 | 81 | 99 | 1 | 0.28 | 0.15 |
| 7015 | 115 | 20 | 1.1 | 0.6 | 82 | 108 | 1 | 0.5 | 0.27 | |
| 7215 | 130 | 25 | 1.5 | 1 | 84 | 121 | 1.5 | 0.92 | 0.5 | |
| 7916 | 80 | 110 | 16 | 1 | 0.6 | 86 | 104 | 1 | 0.3 | 0.16 |
| 7016 | 125 | 22 | 1.1 | 0.6 | 87 | 118 | 1 | 0.67 | 0.36 | |
| 7216 | 140 | 26 | 2 | 1 | 90 | 130 | 2 | 1.09 | 0.59 | |
| 7017 | 85 | 130 | 22 | 1.1 | 0.6 | 92 | 123 | 1 | 0.71 | 0.38 |
| 7217 | 150 | 28 | 2 | 1 | 95 | 140 | 2 | 1.35 | 0.73 | |
| 7918 | 90 | 125 | 18 | 1.1 | 0.6 | 97 | 118 | 1 | 0.45 | 0.24 |
| 7018 | 140 | 24 | 1.5 | 1 | 99 | 131 | 1.5 | 0.92 | 0.5 | |
| 7919 | 95 | 130 | 18 | 1.1 | 0.6 | 102 | 123 | 1 | 0.46 | 0.25 |
| 7019 | 145 | 24 | 1.5 | 1 | 104 | 136 | 1.5 | 0.95 | 0.51 | |
| 7920 | 100 | 140 | 20 | 1.1 | 0.6 | 107 | 133 | 1 | 0.64 | 0.35 |
| 7571 | 150 | 24 | 1.5 | 1 | 109 | 141 | 1.5 | 0.99 | 0.54 | |
| 7921 | 105 | 145 | 20 | 1.1 | 0.6 | 112 | 138 | 1 | 0.66 | 0.36 |
| 7922 | 110 | 150 | 20 | 1.1 | 0.6 | 117 | 143 | 1 | 0.69 | 0.37 |
About us
ZheJiang REET BEARING.CO.,LTD is a professional bearing manufacturer and exporter.
We have a wealth of technical.All producing processes are finished in our manufactory. As an ISO9001:2000 certified manufacturer,we will solve various problems in application and use of our bearings.
Our company is an authorized distributor of FAG, INA, CZPT and other world brand bearings.Our company has the right to self-export bearings and launches its own brand RTB.
Our bearing had been exported to more than 20 countries worldwide and are warmly welcomed.
We are looking forward to your order.
FAQ
1.Is the company a production factory or a trading company?
ZheJiang REET BEARING CO.,LTD is a manufacturing enterprise focusing on bearings and integrating research, production and sales.
2.How many the MOQ of your company?
Depending on the size of the bearing, the MOQ is variable, if you are interested, you can contact me for a quote.
3.Does the company accept OEM or customized bearings?
In addition to standard products, we also supply non-standard and modified standard products for special application. Meanwhile, we provide OEM service.
4.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.
5.What are the company’s delivery terms?
We can accept EXW,FOB,CFR,CIF,etc. You can choose the 1 which is the most convenient cost effective for you.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Contact Angle: | 15° |
|---|---|
| Aligning: | Aligning Bearing |
| Separated: | Separated |
| Rows Number: | Single |
| Load Direction: | Radial Bearing |
| Material: | Ceramic |
| Samples: |
US$ 2/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can you describe the various types of seals and shields used with plastic bearings for contamination prevention?
Yes, I can describe the various types of seals and shields used with plastic bearings for contamination prevention. Here’s a detailed explanation:
- 1. Contact Seals:
Contact seals, also known as lip seals or rubber seals, are common types of seals used with plastic bearings. These seals are made of elastomers such as nitrile rubber (NBR) or fluorocarbon rubber (FKM) and provide a physical barrier between the bearing and the external environment. Contact seals have a lip that makes direct contact with the inner or outer ring of the bearing, effectively preventing the entry of contaminants such as dust, dirt, or moisture. They offer good sealing performance and are suitable for applications with moderate operating speeds and temperatures.
- 2. Non-Contact Seals:
Non-contact seals, also known as labyrinth seals or gap seals, are designed to minimize friction and allow for higher operating speeds. These seals consist of multiple labyrinth-like grooves or channels that create a tortuous path for contaminants, preventing their entry into the bearing. Non-contact seals are typically made of materials like plastic or metal. They offer reduced heat generation, lower torque, and increased efficiency compared to contact seals. However, they may not provide as high a level of contamination protection in extremely dusty or wet environments.
- 3. Shields:
Shields, also referred to as metal shields or metal covers, are used with plastic bearings to provide a barrier against contaminants. Shields are generally made of metal, such as stainless steel or sheet steel, and are attached to the outer ring of the bearing. They have a gap or clearance between the shield and the inner ring, allowing for smooth rotation while preventing larger particles or debris from entering the bearing. Shields offer good protection against coarse contaminants and are suitable for applications with moderate speeds and temperatures.
- 4. Combination Seals and Shields:
In certain applications, a combination of seals and shields may be used to provide enhanced contamination prevention. These combination seals and shields offer a dual-layered protection system. For example, a plastic bearing may have a contact seal on one side to provide effective sealing against contaminants, while a shield is used on the other side to provide additional protection and allow for visual inspection or lubrication access. This combination approach offers flexibility and adaptability to different operating conditions and contamination risks.
- 5. Customized Sealing Solutions:
In addition to standard seals and shields, customized sealing solutions can be developed based on specific application requirements. Custom seals or shields can be designed to address unique challenges such as extreme temperatures, aggressive chemicals, or high-pressure environments. These specialized sealing solutions ensure optimal contamination prevention and performance in demanding applications.
In summary, plastic bearings can be equipped with various types of seals and shields for contamination prevention. Contact seals, non-contact seals, shields, and combination seals and shields are commonly used to provide a barrier against contaminants such as dust, dirt, or moisture. The selection of the appropriate sealing solution depends on factors such as operating conditions, contamination risks, speed requirements, and specific application needs. By effectively preventing contamination, these seals and shields contribute to the reliable and long-lasting performance of plastic bearings in diverse industrial and mechanical applications.
What is the impact of proper lubrication on the performance and lifespan of plastic bearings?
Proper lubrication plays a significant role in the performance and lifespan of plastic bearings. Here’s a detailed explanation of the impact of proper lubrication:
- 1. Reduced Friction and Wear:
Proper lubrication helps reduce friction and wear in plastic bearings. Lubricants create a thin film of lubrication between the bearing surfaces, minimizing direct contact and friction. This reduces the heat generated during operation and prevents excessive wear on the bearing materials. By reducing friction and wear, proper lubrication contributes to improved performance, efficiency, and extended lifespan of plastic bearings.
- 2. Heat Dissipation:
Lubrication helps dissipate heat generated during the operation of plastic bearings. The lubricant absorbs and carries away heat from the bearing surfaces, preventing overheating and potential damage. Proper heat dissipation through lubrication ensures that the bearing operates within its optimum temperature range, promoting reliable performance and preventing premature failure due to excessive heat buildup.
- 3. Corrosion Protection:
Proper lubrication provides corrosion protection for plastic bearings. Lubricants form a protective barrier on the bearing surfaces, preventing moisture and contaminants from coming into direct contact with the bearing materials. This helps prevent corrosion and degradation of the bearing surfaces, ensuring their long-term functionality and extending the lifespan of the plastic bearings.
- 4. Noise Reduction:
Adequate lubrication contributes to noise reduction in plastic bearings. The lubricant helps dampen vibrations and reduce the impact of metal-to-metal contact, resulting in quieter operation. By minimizing noise generation, proper lubrication enhances the overall user experience, reduces noise pollution, and contributes to a more comfortable working environment.
- 5. Contaminant Exclusion:
Lubrication helps exclude contaminants from entering the bearing system. The lubricant forms a protective barrier that prevents dust, dirt, and other particles from reaching the bearing surfaces. This is particularly important for plastic bearings, as contaminants can cause abrasion, increase friction, and lead to premature wear. Proper lubrication ensures the integrity of the bearing system by keeping it clean and free from harmful particles.
- 6. Maintenance and Reliability:
Proper lubrication is essential for the maintenance and reliability of plastic bearings. Regular lubrication maintenance helps monitor the condition of the bearings, identify potential issues, and take appropriate preventive measures. Additionally, lubrication intervals and quantities should be adhered to as recommended by the bearing manufacturer. Proper lubrication maintenance ensures the continuous and reliable operation of plastic bearings, minimizing downtime and costly repairs.
In summary, proper lubrication has a significant impact on the performance and lifespan of plastic bearings. It reduces friction and wear, dissipates heat, provides corrosion protection, reduces noise, excludes contaminants, and ensures maintenance and reliability. Following manufacturer guidelines and implementing a proper lubrication regimen is essential for optimizing the performance, efficiency, and longevity of plastic bearings.
How do plastic bearings compare to traditional metal or steel bearings in terms of performance?
When comparing plastic bearings to traditional metal or steel bearings, several factors come into play in terms of performance. Here’s a detailed comparison of plastic bearings and traditional metal or steel bearings:
- 1. Friction and Wear:
Plastic bearings generally exhibit lower friction coefficients compared to traditional metal or steel bearings. This characteristic results in reduced energy consumption, smoother operation, and less wear on the bearing surfaces. Plastic bearings often have self-lubricating properties, further enhancing their resistance to wear and reducing the need for external lubrication. On the other hand, metal or steel bearings may require regular lubrication to maintain optimal performance and prevent excessive wear.
- 2. Corrosion Resistance:
Plastic bearings offer excellent resistance to corrosion, making them particularly suitable for applications in moist or corrosive environments. Unlike metal or steel bearings, plastic bearings do not rust or corrode, allowing them to maintain their performance and integrity over time. Metal or steel bearings, while often treated with protective coatings, may still be susceptible to corrosion if the coating is compromised or in aggressive operating conditions.
- 3. Load Capacity:
Traditional metal or steel bearings generally have higher load-carrying capacities compared to plastic bearings. Metal bearings are known for their high strength and ability to withstand heavy loads and shock forces. Plastic bearings, although continuously improving in this aspect, may have lower load-carrying capacities and are typically more suitable for moderate load applications. It is important to carefully evaluate the specific load requirements of the application when considering plastic bearings.
- 4. Temperature Range:
Metal or steel bearings typically have a broader temperature range compared to plastic bearings. While plastic bearings can operate effectively within specific temperature limits, exposure to extreme temperatures can affect their performance. Certain plastic materials, such as PEEK, offer higher-temperature resistance, but they may still have limitations compared to metal or steel bearings, which can handle a wider range of temperatures.
- 5. Noise and Vibration:
Plastic bearings possess inherent damping properties, which can help reduce noise levels and vibrations in machinery and equipment. The ability of plastic materials to absorb vibrations contributes to a quieter and smoother operation. Metal or steel bearings, although effective in many applications, may produce more noise and vibrations due to their higher rigidity and less damping characteristics.
- 6. Cost and Maintenance:
Plastic bearings can offer cost advantages over metal or steel bearings in certain situations. Plastic bearings often have lower material and production costs, which can contribute to overall cost savings. Additionally, plastic bearings can require less maintenance due to their self-lubricating properties, resistance to corrosion, and reduced wear. Metal or steel bearings may require more frequent lubrication, inspection, and replacement, which can increase maintenance costs and downtime.
It’s important to note that the performance of plastic bearings and traditional metal or steel bearings can vary depending on the specific application requirements. While plastic bearings excel in certain areas such as corrosion resistance, low friction, and noise reduction, metal or steel bearings may be more suitable for high-load or high-temperature applications. Engineers and designers should carefully evaluate the performance characteristics of both types of bearings and consider the specific needs of the application to determine the most appropriate choice.
editor by CX 2024-05-07
China Good quality Professional Manufacturer Full Ceramic Bearings Plastic Bearing with Good quality
Product Description
Professional manufacturer Full ceramic bearings plastic bearing
| Quality standard | ISO 9001:2008 standard |
| Ring Material | Chrome Steel ,Carbon steel,Stainless steel |
| Delivert Date | Normally ready goods and stock within 7 days |
| Greese/Oil | As you requirement, such as SRL ,PS2, Alvania R12 and so on |
| Payment Term | 30% T/T in Advance, 70% T/T Against Copy Of B/L |
| Application | Home appliances, low noise and high speed electric motors, automotive components, pumps, machinery. |
| Package | Single box |
| Details |
We have complete process for the production and quality assurance to make sure our products can meet your requirement. 1.Assembly 2.Windage test 3.Cleaning 4.Rotary test 5.Greasing and gland 6.Noise inspection 7.Appearance inspection 8.Rust prevention 9.Product packaging |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Body: | Roller Bearings |
|---|---|
| The Number of Rows: | Double |
| Outer Dimension: | Small (28-55mm) |
| Material: | Plastic |
| Spherical: | Non-Aligning Bearings |
| Main Matterial: | Plastic and Stainless Steel |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is the role of cage design and materials in plastic bearing performance and durability?
The role of cage design and materials in plastic bearing performance and durability is significant. Here’s a detailed explanation:
- 1. Guidance and Retention:
The primary role of a cage in a plastic bearing is to guide and retain the rolling elements, such as balls or rollers. The cage holds the rolling elements in position, ensuring proper spacing and alignment within the bearing. This guidance and retention function is crucial for maintaining smooth and efficient operation, preventing contact between rolling elements, and distributing loads evenly. The cage design plays a critical role in achieving optimal performance and durability by providing effective guidance and retention of the rolling elements.
- 2. Load Distribution:
The cage design and materials contribute to the load distribution within the bearing. The cage helps distribute the applied loads evenly to the rolling elements, preventing excessive stress on individual elements and minimizing the risk of premature failure. An efficient cage design ensures that the load is shared appropriately among the rolling elements, maximizing the bearing’s load-carrying capacity and enhancing its durability.
- 3. Friction and Heat Generation:
The cage design and materials also influence the friction and heat generation within the bearing. A well-designed cage minimizes friction between the rolling elements and the cage itself, reducing energy losses and heat generation. Additionally, the choice of cage material can impact the coefficient of friction and thermal conductivity. Optimal cage materials with low friction and good thermal properties can contribute to improved performance, lower operating temperatures, and increased durability of the plastic bearing.
- 4. Lubricant Retention:
Certain cage designs are specifically engineered to assist in lubricant retention within the bearing. The cage structure can create pockets or reservoirs that hold and distribute lubricating oil or grease to the rolling elements. This ensures a continuous and adequate supply of lubrication, reducing friction, wear, and the risk of premature failure. Proper lubricant retention facilitated by the cage design is essential for maintaining the performance and durability of plastic bearings.
- 5. Resistance to Harsh Environments:
The choice of cage material is crucial for ensuring the resistance of plastic bearings to harsh operating environments. Different cage materials offer varying degrees of resistance to chemicals, moisture, temperature extremes, and other environmental factors. Selecting the appropriate cage material that is compatible with the application’s operating conditions is essential to maintain the bearing’s performance and durability over time.
- 6. Durability and Service Life:
The cage design and materials significantly impact the overall durability and service life of plastic bearings. A well-designed cage that effectively guides and retains the rolling elements, distributes loads evenly, minimizes friction, and retains lubrication contributes to the bearing’s longevity. Additionally, using durable and suitable cage materials that can withstand the operating conditions ensures the bearing’s ability to withstand wear, fatigue, and other forms of degradation, resulting in extended service life.
In summary, the cage design and materials play a crucial role in the performance and durability of plastic bearings. The cage provides guidance, retention, and load distribution for the rolling elements, minimizes friction and heat generation, assists in lubricant retention, ensures resistance to harsh environments, and contributes to the overall durability and service life of the bearing. By considering the appropriate cage design and materials, manufacturers can optimize the performance, reliability, and longevity of plastic bearings in various applications.
What are the potential challenges or limitations of using plastic bearings in specific industries?
While plastic bearings offer numerous advantages, they also have certain challenges and limitations when used in specific industries. Here’s a detailed explanation of the potential challenges or limitations:
- 1. Temperature Limitations:
One of the limitations of plastic bearings is their temperature limitations. Different types of plastic materials have varying temperature ranges within which they can operate effectively. In high-temperature environments, plastic bearings may experience reduced load capacity, increased friction, or even deformation. Therefore, in industries such as aerospace, automotive, or heavy machinery, where high temperatures are common, alternative bearing materials may be more suitable.
- 2. Load Capacity:
Plastic bearings generally have lower load carrying capacities compared to their metal counterparts. They may not be suitable for applications with extremely high loads or heavy machinery where substantial forces are involved. Exceeding the load capacity of plastic bearings can lead to premature wear, deformation, or failure. Therefore, in industries that require heavy-duty applications or high load capacities, metal bearings or other robust bearing solutions may be preferred.
- 3. Speed Limitations:
Plastic bearings may have limitations when it comes to high-speed applications. The speed at which plastic bearings can operate effectively without experiencing excessive friction, heat buildup, or wear is typically lower compared to metal bearings. In industries that require high rotational speeds, such as industrial machinery or automotive applications, alternative bearing materials or specialized designs may be necessary to handle the demands of high-speed operation.
- 4. Chemical Compatibility:
While plastic bearings offer excellent chemical resistance to a wide range of substances, they may not be compatible with certain aggressive chemicals or solvents. Some chemicals can cause degradation, swelling, or softening of certain plastic materials, affecting the performance and lifespan of the bearings. In industries where exposure to harsh chemicals is prevalent, it is crucial to select plastic bearings that are specifically designed to withstand the specific chemical environment or consider alternative bearing materials.
- 5. Abrasion and Wear:
Plastic bearings may be more susceptible to abrasion and wear compared to metal bearings, especially in applications involving abrasive particles or high levels of friction. While plastic bearings are designed to resist wear, prolonged exposure to abrasive conditions can lead to increased wear rates and reduced lifespan. In industries such as mining, construction, or material handling, where abrasive contaminants are present, additional protective measures or alternative bearing materials may be necessary to ensure long-term performance.
- 6. Application-Specific Considerations:
Each industry has its specific requirements and operating conditions that must be considered when selecting bearings. Factors such as load type, vibration, shock, moisture, and environmental conditions can impact the suitability of plastic bearings. It is essential to evaluate the specific application requirements and consult with bearing manufacturers or industry experts to determine whether plastic bearings can meet the demands of the particular industry.
In summary, while plastic bearings offer many advantages, they also have limitations in specific industries. Temperature limitations, load capacity, speed limitations, chemical compatibility, abrasion and wear susceptibility, and application-specific considerations are important factors to consider when deciding whether plastic bearings are suitable for a particular industry or if alternative bearing materials should be considered.
Can you describe the load-carrying capacity and load ratings of plastic bearings?
Load-carrying capacity and load ratings are important considerations when evaluating the performance of plastic bearings. Here’s a detailed description of load-carrying capacity and load ratings for plastic bearings:
- Load-Carrying Capacity:
The load-carrying capacity of a bearing refers to its ability to support and distribute loads without excessive deformation or failure. It is a measure of the maximum load that a bearing can withstand under specific operating conditions. Plastic bearings typically have lower load-carrying capacities compared to traditional metal or steel bearings. This is because plastic materials generally have lower strength and stiffness properties compared to metals.
The load-carrying capacity of plastic bearings depends on various factors, including the material properties, design, and operating conditions. Plastic bearings are suitable for applications with moderate loads where the load requirements are within their capacity limits. It is important to consult the manufacturer’s specifications and guidelines to ensure that the chosen plastic bearing can handle the expected loads for a given application.
- Load Ratings:
Load ratings provide a standardized measure of a bearing’s load-carrying capacity. They are typically provided by bearing manufacturers and help users select the appropriate bearing for their specific application. Load ratings consider factors such as bearing geometry, material properties, and operating conditions to determine the maximum allowable loads.
In the case of plastic bearings, load ratings are often specified as dynamic load ratings and static load ratings:
- 1. Dynamic Load Rating:
The dynamic load rating indicates the maximum load that a bearing can sustain for a specified number of rotations or cycles while still maintaining acceptable performance and reliability. It takes into account factors such as the rolling elements’ fatigue life and the material’s ability to withstand cyclic stresses. The dynamic load rating is typically higher than the static load rating since bearings are designed to handle dynamic loads during operation.
- 2. Static Load Rating:
The static load rating refers to the maximum load that a bearing can sustain without experiencing permanent deformation or failure while being stationary or subjected to a constant load. It is a measure of the bearing’s capacity to handle static or slowly changing loads. The static load rating is generally higher than the dynamic load rating since static loads do not induce the same level of stress and fatigue as dynamic loads.
It’s important to note that load ratings provided by manufacturers are based on standardized testing methods and assumptions about operating conditions. Actual load capacities in specific applications may vary depending on factors such as bearing size, temperature, speed, lubrication, and alignment. Therefore, it is crucial to consider the specific application requirements and consult the manufacturer’s guidelines to ensure that the selected plastic bearing is suitable for the anticipated loads.
editor by CX 2024-04-29
China best Auto Wheelengine/Auto/Square Bore/Needle Roller/Thrust Ball/Roller/ Taper Roller/Forklift Truck/Hybrid Ceramic Ball/Plastic/Slewing Bearing/Auto Prats 7009 bearing engineering
Product Description
The rings and balls of all-ceramic deep groove ball bearings are made of silicon nitride (Si3N4) ceramic material. This bearing can be designed as a full ball or with PTFE, PEEK or stainless steel 304/316 cage. PTFE is the default standard cage.
Full ceramic deep groove ball bearings have the characteristics of non-magnetic and electrical insulation, wear-resistant and corrosion-resistant, oil-free and self-lubricating, high temperature and cold resistance, and can be used in extremely harsh environments and special working conditions. It can be used in high temperature environment above 400ºC under the condition of full ball or equipped with stainless steel 316 cage. The PEEK cage can also be used at temperatures above 250°C. For CZPT temperatures (for example, lower than -70°C), full ceramic bearings with PTFE cages or stainless steel 316 cages can be used. Normally, the normal radial clearance is C0. When it is necessary to adapt to the extreme environment, other clearances can be customized.
| model | size(mm) | Installation size (mm) | weight | weight | ||||||
| da | Da | ra | (kg) | (kg) | ||||||
| d | D | B | r(min) | r1(min) | min | max | max | ZrO2 | Si3N4 | |
| 7900 | 10 | 22 | 6 | 0.3 | 0.15 | 12.5 | 19.5 | 0.3 | 0.007 | 0.0038 |
| 7000 | 26 | 8 | 0.3 | 0.15 | 12.5 | 23.5 | 0.3 | 0.014 | 0.0075 | |
| 7200 | 30 | 9 | 0.6 | 0.3 | 15 | 25 | 0.6 | 0.571 | 0.013 | |
| 7300 | 35 | 11 | 0.6 | 0.3 | 15 | 30 | 0.6 | 0.04 | 0.571 | |
| 7901 | 12 | 24 | 6 | 0.3 | 0.15 | 14.5 | 21.5 | 0.3 | 0.008 | 0.0042 |
| 7001 | 28 | 8 | 0.3 | 0.15 | 14.5 | 25.5 | 0.3 | 0.017 | 0.0092 | |
| 7201 | 32 | 10 | 0.6 | 0.3 | 17 | 27 | 0.6 | 0.571 | 0.015 | |
| 7301 | 37 | 12 | 1 | 0.6 | 18 | 31 | 1 | 0.046 | 0.571 | |
| 7902 | 15 | 28 | 7 | 0.3 | 0.15 | 17.5 | 25.5 | 0.3 | 0.012 | 0.0063 |
| 7002 | 32 | 9 | 0.3 | 0.15 | 17.5 | 29.5 | 0.3 | 0.571 | 0.013 | |
| 7202 | 35 | 11 | 0.6 | 0.3 | 20 | 30 | 0.3 | 0.035 | 0.019 | |
| 7302 | 42 | 13 | 1 | 0.6 | 21 | 36 | 1 | 0.064 | 0.035 | |
| 7903 | 17 | 30 | 7 | 0.3 | 0.15 | 19.5 | 27.5 | 0.3 | 0.013 | 0.0071 |
| 7003 | 35 | 10 | 0.3 | 0.15 | 19.5 | 32.5 | 0.3 | 0.032 | 0.017 | |
| 7203 | 40 | 12 | 0.6 | 0.3 | 22 | 35 | 0.6 | 0.052 | 0.571 | |
| 7303 | 47 | 14 | 1 | 0.6 | 23 | 41 | 1 | 0.087 | 0.047 | |
| 7904 | 20 | 37 | 9 | 0.3 | 0.15 | 22.5 | 34.5 | 0.3 | 0.571 | 0.015 |
| 7004 | 42 | 12 | 0.6 | 0.3 | 25 | 37 | 0.6 | 0.052 | 0.571 | |
| 7204 | 47 | 14 | 1 | 0.6 | 26 | 41 | 1 | 0.082 | 0.045 | |
| 7304 | 52 | 15 | 1.1 | 0.6 | 27 | 45 | 1 | 0.11 | 0.06 | |
| 7905 | 25 | 42 | 9 | 0.3 | 0.15 | 27.5 | 39.5 | 0.3 | 0.032 | 0.018 |
| 7005 | 47 | 12 | 0.6 | 0.3 | 30 | 42 | 0.6 | 0.061 | 0.033 | |
| 7205 | 52 | 15 | 1 | 0.6 | 31 | 46 | 1 | 0.099 | 0.054 | |
| 7305 | 62 | 17 | 1.1 | 0.6 | 32 | 55 | 1 | 0.18 | 0.098 | |
| 7906 | 30 | 47 | 9 | 0.3 | 0.15 | 32.5 | 44.5 | 1 | 0.04 | 0.571 |
| 7006 | 55 | 13 | 1 | 0.6 | 36 | 49 | 1 | 0.089 | 0.048 | |
| 7206 | 62 | 16 | 1 | 0.6 | 36 | 56 | 1 | 0.15 | 0.083 | |
| 7306 | 72 | 19 | 1.1 | 0.6 | 37 | 65 | 1 | 0.27 | 0.14 | |
| 7907 | 35 | 55 | 10 | 0.6 | 0.3 | 40 | 50 | 0.6 | 0.058 | 0.031 |
| 7007 | 62 | 14 | 1 | 0.6 | 41 | 56 | 1 | 0.12 | 0.063 | |
| 7207 | 72 | 17 | 1.1 | 0.6 | 42 | 65 | 1 | 0.22 | 0.12 | |
| 7307 | 80 | 21 | 1.5 | 1 | 44 | 71 | 1.5 | 0.36 | 0.19 | |
| 7908 | 40 | 62 | 12 | 0.6 | 0.3 | 45 | 57 | 0.6 | 0.09 | 0.05 |
| 7008 | 68 | 15 | 1 | 0.6 | 46 | 62 | 1 | 0.15 | 0.08 | |
| 7208 | 80 | 18 | 1.1 | 0.6 | 47 | 73 | 1 | 0.28 | 0.15 | |
| 7308 | 90 | 23 | 1.5 | 1 | 49 | 81 | 1.5 | 0.49 | 0.27 | |
| 7909 | 45 | 68 | 12 | 0.6 | 0.3 | 50 | 63 | 0.6 | 0.097 | 0.053 |
| 7009 | 75 | 16 | 1 | 0.6 | 51 | 69 | 1 | 0.19 | 0.1 | |
| 7209 | 85 | 19 | 1.1 | 0.6 | 52 | 78 | 1 | 0.32 | 0.175 | |
| 7309 | 100 | 25 | 1.5 | 1 | 54 | 91 | 1.5 | 0.64 | 0.345 | |
| 7910 | 50 | 72 | 12 | 0.6 | 0.3 | 55 | 67 | 0.6 | 0.1 | 0.06 |
| 7571 | 80 | 16 | 1 | 0.6 | 56 | 74 | 1 | 0.2 | 0.11 | |
| 7210 | 90 | 20 | 1.1 | 0.6 | 57 | 83 | 1 | 0.35 | 0.19 | |
| 7310 | 110 | 27 | 2 | 1 | 60 | 100 | 2 | 0.82 | 0.44 | |
| 7911 | 55 | 80 | 13 | 1 | 0.6 | 61 | 74 | 1 | 0.15 | 0.08 |
| 7011 | 90 | 18 | 1.1 | 0.6 | 62 | 83 | 1 | 0.29 | 0.16 | |
| 7211 | 100 | 21 | 1.5 | 1 | 64 | 91 | 1.5 | 0.48 | 0.26 | |
| 7311 | 120 | 29 | 2 | 1 | 65 | 110 | 2 | 1.05 | 0.57 | |
| 7912 | 60 | 85 | 13 | 1 | 0.6 | 66 | 79 | 1 | 0.15 | 0.08 |
| 7012 | 95 | 18 | 1.1 | 0.6 | 67 | 88 | 1 | 0.32 | 0.17 | |
| 7212 | 110 | 22 | 1.5 | 1 | 69 | 101 | 1.5 | 0.6 | 0.33 | |
| 7312 | 130 | 31 | 2.1 | 1.1 | 72 | 118 | 2 | 1.32 | 0.72 | |
| 7913 | 65 | 90 | 13 | 1 | 0.6 | 71 | 84 | 1 | 0.17 | 0.09 |
| 7013 | 100 | 18 | 1.1 | 0.6 | 72 | 93 | 1 | 0.34 | 0.18 | |
| 7213 | 120 | 23 | 1.5 | 1 | 74 | 111 | 1.5 | 0.77 | 0.42 | |
| 7313 | 140 | 33 | 2.1 | 1.1 | 77 | 128 | 2 | 1.62 | 0.88 | |
| 7914 | 70 | 100 | 16 | 1 | 0.6 | 76 | 94 | 1 | 0.27 | 0.15 |
| 7014 | 110 | 20 | 1.1 | 0.6 | 77 | 103 | 1 | 0.47 | 0.25 | |
| 7214 | 125 | 24 | 1.5 | 1 | 79 | 116 | 1.5 | 0.84 | 0.45 | |
| 7314 | 150 | 35 | 2.1 | 1.1 | 82 | 138 | 2 | 1.98 | 1.07 | |
| 7915 | 75 | 105 | 16 | 1 | 0.6 | 81 | 99 | 1 | 0.28 | 0.15 |
| 7015 | 115 | 20 | 1.1 | 0.6 | 82 | 108 | 1 | 0.5 | 0.27 | |
| 7215 | 130 | 25 | 1.5 | 1 | 84 | 121 | 1.5 | 0.92 | 0.5 | |
| 7916 | 80 | 110 | 16 | 1 | 0.6 | 86 | 104 | 1 | 0.3 | 0.16 |
| 7016 | 125 | 22 | 1.1 | 0.6 | 87 | 118 | 1 | 0.67 | 0.36 | |
| 7216 | 140 | 26 | 2 | 1 | 90 | 130 | 2 | 1.09 | 0.59 | |
| 7017 | 85 | 130 | 22 | 1.1 | 0.6 | 92 | 123 | 1 | 0.71 | 0.38 |
| 7217 | 150 | 28 | 2 | 1 | 95 | 140 | 2 | 1.35 | 0.73 | |
| 7918 | 90 | 125 | 18 | 1.1 | 0.6 | 97 | 118 | 1 | 0.45 | 0.24 |
| 7018 | 140 | 24 | 1.5 | 1 | 99 | 131 | 1.5 | 0.92 | 0.5 | |
| 7919 | 95 | 130 | 18 | 1.1 | 0.6 | 102 | 123 | 1 | 0.46 | 0.25 |
| 7019 | 145 | 24 | 1.5 | 1 | 104 | 136 | 1.5 | 0.95 | 0.51 | |
| 7920 | 100 | 140 | 20 | 1.1 | 0.6 | 107 | 133 | 1 | 0.64 | 0.35 |
| 7571 | 150 | 24 | 1.5 | 1 | 109 | 141 | 1.5 | 0.99 | 0.54 | |
| 7921 | 105 | 145 | 20 | 1.1 | 0.6 | 112 | 138 | 1 | 0.66 | 0.36 |
| 7922 | 110 | 150 | 20 | 1.1 | 0.6 | 117 | 143 | 1 | 0.69 | 0.37 |
About us
ZheJiang REET BEARING.CO.,LTD is a professional bearing manufacturer and exporter.
We have a wealth of technical.All producing processes are finished in our manufactory. As an ISO9001:2000 certified manufacturer,we will solve various problems in application and use of our bearings.
Our company is an authorized distributor of FAG, INA, CZPT and other world brand bearings.Our company has the right to self-export bearings and launches its own brand RTB.
Our bearing had been exported to more than 20 countries worldwide and are warmly welcomed.
We are looking forward to your order.
FAQ
1.Is the company a production factory or a trading company?
ZheJiang REET BEARING CO.,LTD is a manufacturing enterprise focusing on bearings and integrating research, production and sales.
2.How many the MOQ of your company?
Depending on the size of the bearing, the MOQ is variable, if you are interested, you can contact me for a quote.
3.Does the company accept OEM or customized bearings?
In addition to standard products, we also supply non-standard and modified standard products for special application. Meanwhile, we provide OEM service.
4.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.
5.What are the company’s delivery terms?
We can accept EXW,FOB,CFR,CIF,etc. You can choose the 1 which is the most convenient cost effective for you.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Zro2 Weight: | 0.19 |
|---|---|
| Si3n4 Weight: | 0.1 |
| Model: | 7009 |
| R1(Min): | 0.6 |
| Contact Angle: | 15° |
| Aligning: | Aligning Bearing |
| Samples: |
US$ 2/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can you describe the various types of seals and shields used with plastic bearings for contamination prevention?
Yes, I can describe the various types of seals and shields used with plastic bearings for contamination prevention. Here’s a detailed explanation:
- 1. Contact Seals:
Contact seals, also known as lip seals or rubber seals, are common types of seals used with plastic bearings. These seals are made of elastomers such as nitrile rubber (NBR) or fluorocarbon rubber (FKM) and provide a physical barrier between the bearing and the external environment. Contact seals have a lip that makes direct contact with the inner or outer ring of the bearing, effectively preventing the entry of contaminants such as dust, dirt, or moisture. They offer good sealing performance and are suitable for applications with moderate operating speeds and temperatures.
- 2. Non-Contact Seals:
Non-contact seals, also known as labyrinth seals or gap seals, are designed to minimize friction and allow for higher operating speeds. These seals consist of multiple labyrinth-like grooves or channels that create a tortuous path for contaminants, preventing their entry into the bearing. Non-contact seals are typically made of materials like plastic or metal. They offer reduced heat generation, lower torque, and increased efficiency compared to contact seals. However, they may not provide as high a level of contamination protection in extremely dusty or wet environments.
- 3. Shields:
Shields, also referred to as metal shields or metal covers, are used with plastic bearings to provide a barrier against contaminants. Shields are generally made of metal, such as stainless steel or sheet steel, and are attached to the outer ring of the bearing. They have a gap or clearance between the shield and the inner ring, allowing for smooth rotation while preventing larger particles or debris from entering the bearing. Shields offer good protection against coarse contaminants and are suitable for applications with moderate speeds and temperatures.
- 4. Combination Seals and Shields:
In certain applications, a combination of seals and shields may be used to provide enhanced contamination prevention. These combination seals and shields offer a dual-layered protection system. For example, a plastic bearing may have a contact seal on one side to provide effective sealing against contaminants, while a shield is used on the other side to provide additional protection and allow for visual inspection or lubrication access. This combination approach offers flexibility and adaptability to different operating conditions and contamination risks.
- 5. Customized Sealing Solutions:
In addition to standard seals and shields, customized sealing solutions can be developed based on specific application requirements. Custom seals or shields can be designed to address unique challenges such as extreme temperatures, aggressive chemicals, or high-pressure environments. These specialized sealing solutions ensure optimal contamination prevention and performance in demanding applications.
In summary, plastic bearings can be equipped with various types of seals and shields for contamination prevention. Contact seals, non-contact seals, shields, and combination seals and shields are commonly used to provide a barrier against contaminants such as dust, dirt, or moisture. The selection of the appropriate sealing solution depends on factors such as operating conditions, contamination risks, speed requirements, and specific application needs. By effectively preventing contamination, these seals and shields contribute to the reliable and long-lasting performance of plastic bearings in diverse industrial and mechanical applications.
Can you provide examples of machinery or equipment that rely on precision plastic bearings for efficient operation?
Precision plastic bearings are essential components in numerous machinery and equipment where efficient and reliable operation is crucial. Here are some examples of machinery and equipment that rely on precision plastic bearings:
- 1. Robotics and Automation Systems:
Precision plastic bearings are widely used in robotics and automation systems. These bearings provide smooth and precise movement in robotic arms, linear actuators, and automated assembly lines. They contribute to accurate positioning, repeatability, and high-speed operation, ensuring efficient and reliable performance in various industrial automation applications.
- 2. CNC Machines and Machine Tools:
CNC machines and machine tools, such as milling machines, lathes, and routers, rely on precision plastic bearings for smooth and accurate motion control. These bearings are used in linear guides, spindles, and ball screw assemblies. Precision plastic bearings enable precise positioning, reduce backlash, and contribute to high machining accuracy and efficiency.
- 3. Printing and Packaging Machinery:
Precision plastic bearings play a critical role in printing and packaging machinery. They are used in printing presses, label applicators, packaging equipment, and converting machines. These bearings provide smooth rotation and linear motion in rollers, guides, and feed systems. They help maintain precise registration, reduce downtime, and ensure efficient production in the printing and packaging industry.
- 4. Semiconductor and Electronics Manufacturing:
Precision plastic bearings are integral to semiconductor and electronics manufacturing equipment. They are used in wafer processing machines, pick-and-place machines, wire bonders, and inspection systems. These bearings contribute to precise positioning, smooth motion, and low particulate generation, ensuring efficient and reliable manufacturing processes in the semiconductor and electronics industry.
- 5. Optical and Imaging Systems:
Precision plastic bearings are found in optical and imaging systems, including cameras, scanners, microscopes, and telescopes. They provide smooth and stable movement in lens focusing mechanisms, stage positioning systems, and image stabilization mechanisms. Precision plastic bearings help achieve sharp and clear imaging, precise measurements, and efficient optical system operation.
- 6. Medical and Laboratory Equipment:
Precision plastic bearings are critical components in medical and laboratory equipment. They are used in centrifuges, pipetting systems, diagnostic devices, and analytical instruments. These bearings offer low friction, precise motion control, and resistance to chemicals and sterilization processes. Precision plastic bearings contribute to accurate sample handling, reliable test results, and efficient operation in medical and laboratory settings.
These examples highlight the diverse range of machinery and equipment that rely on precision plastic bearings for efficient operation. Precision plastic bearings are also used in textile machinery, aerospace systems, measuring instruments, and other applications where precise motion control, low friction, and reliable performance are essential.
How do plastic bearings compare to traditional metal or steel bearings in terms of performance?
When comparing plastic bearings to traditional metal or steel bearings, several factors come into play in terms of performance. Here’s a detailed comparison of plastic bearings and traditional metal or steel bearings:
- 1. Friction and Wear:
Plastic bearings generally exhibit lower friction coefficients compared to traditional metal or steel bearings. This characteristic results in reduced energy consumption, smoother operation, and less wear on the bearing surfaces. Plastic bearings often have self-lubricating properties, further enhancing their resistance to wear and reducing the need for external lubrication. On the other hand, metal or steel bearings may require regular lubrication to maintain optimal performance and prevent excessive wear.
- 2. Corrosion Resistance:
Plastic bearings offer excellent resistance to corrosion, making them particularly suitable for applications in moist or corrosive environments. Unlike metal or steel bearings, plastic bearings do not rust or corrode, allowing them to maintain their performance and integrity over time. Metal or steel bearings, while often treated with protective coatings, may still be susceptible to corrosion if the coating is compromised or in aggressive operating conditions.
- 3. Load Capacity:
Traditional metal or steel bearings generally have higher load-carrying capacities compared to plastic bearings. Metal bearings are known for their high strength and ability to withstand heavy loads and shock forces. Plastic bearings, although continuously improving in this aspect, may have lower load-carrying capacities and are typically more suitable for moderate load applications. It is important to carefully evaluate the specific load requirements of the application when considering plastic bearings.
- 4. Temperature Range:
Metal or steel bearings typically have a broader temperature range compared to plastic bearings. While plastic bearings can operate effectively within specific temperature limits, exposure to extreme temperatures can affect their performance. Certain plastic materials, such as PEEK, offer higher-temperature resistance, but they may still have limitations compared to metal or steel bearings, which can handle a wider range of temperatures.
- 5. Noise and Vibration:
Plastic bearings possess inherent damping properties, which can help reduce noise levels and vibrations in machinery and equipment. The ability of plastic materials to absorb vibrations contributes to a quieter and smoother operation. Metal or steel bearings, although effective in many applications, may produce more noise and vibrations due to their higher rigidity and less damping characteristics.
- 6. Cost and Maintenance:
Plastic bearings can offer cost advantages over metal or steel bearings in certain situations. Plastic bearings often have lower material and production costs, which can contribute to overall cost savings. Additionally, plastic bearings can require less maintenance due to their self-lubricating properties, resistance to corrosion, and reduced wear. Metal or steel bearings may require more frequent lubrication, inspection, and replacement, which can increase maintenance costs and downtime.
It’s important to note that the performance of plastic bearings and traditional metal or steel bearings can vary depending on the specific application requirements. While plastic bearings excel in certain areas such as corrosion resistance, low friction, and noise reduction, metal or steel bearings may be more suitable for high-load or high-temperature applications. Engineers and designers should carefully evaluate the performance characteristics of both types of bearings and consider the specific needs of the application to determine the most appropriate choice.
editor by CX 2024-04-19
China Custom Hub Unit Bearing Machine Bearing Plastic Bearings Ceramic Bearing supplier
Product Description
Auto Bearing
| DAC25520037 | DAC35680040 | DAC40700043 | DAC42800342 | DAC47880055 | DAC43800040ABS | DU30620048 |
| DAC25520042 | DAC35680042 | DAC40720036 | DAC42800045 | DAC47880571 | DAC43820047ABS | DU30620051 |
| DAC25520043 | DAC35720033 | DAC40720037 | DAC42800046 | DAC48890044/42 | DAC44825037ABS | DU35680042 |
| DAC25550045 | DAC35770042 | DAC4571055 | DAC42820036 | DAC49840042/40 | DAC45820042ABS | DU35680048 |
| DAC25550048 | DAC35800047 | DAC40740036/34 | DAC42820037 | DAC49840048 | DAC45830039ABS | DU38650052/48 |
| DAC25620048 | DAC36640042 | DAC40740036 | DAC42820040 | DAC49840043 | DAC45830044ABS | DU38760043/40 |
| DAC27520045/43 | DAC36680033 | DAC40740040 | DAC42840036 | DAC49840050 | DAC45840039ABS | DU39680037 |
| DAC27520043 | DAC37680034 | DAC40740042 | DAC42840039 | DAC49880046 | DAC45840042/40ABS | DU39720037 |
| DAC27600050 | DAC37720033 | DAC4571037 | DAC43760043/40 | DAC49900045 | DAC45840045ABS | DU40680042 |
| DAC28580042 | DAC37720037 | DAC4571039 | DAC43760043 | DAC50920050 | DAC45850041ABS | DU4571040 |
| DAC28580044 | DAC37740045 | DAC4571033 | DAC43770042/38 | DAC51890044/42 | DAC45850047ABS | DU4571055 |
| DAC29530037 | DAC38640036/33 | DAC4571041/38 | DAC43770046/42 | DAC51910044 | DAC45880039ABS | DU4571050 |
| DAC30600337 | DAC38650052/48 | DAC40800036/34 | DAC43780044 | DAC35680037ABS | DAC47850052ABS | DU4080045/44 |
| DAC30620038 | DAC38680037 | DAC40800038 | DAC43790041/38 | DAC35720033ABS | DAC48860042/40ABS | DU416800040/35 |
| DAC30630042 | DAC38690039/34 | DAC40800040 | DAC43790045 | DAC37720033ABS | DAC49880048ABS | DU42760039 |
| DAC30640042 | DAC38715713/30 | DAC40800045/44 | DAC43800038 | DAC37720037ABS | DAC49900045ABS | DU42800038 |
| DAC30680045 | DAC381700037 | DAC40820036 | DAC43800050/45 | DAC37740037ABS | DAC50920050ABS | DU43730045/41 |
| DAC32720571/19 | DAC38700038 | DAC408457138 | DAC43820045 | DAC38690039/34ABS | DAC51890044ABS | DU45820045 |
| DAC32720045 | DAC38710039 | DAC40940031/26 | DAC43/45820037 | DAC38730040ABS | DAC51910044/42ABS | DU45850051 |
| DAC32730054 | DAC38720037 | DAC457180032/17 | DAC43/45850037 | DAC38740040ABS | DAC51910044ABS | DU45900054/51 |
| DAC34620037 | DAC38720040 | DAC41680040/35 | DAC45800045 | DAC39720037ABS | DAC51960050ABS | DU47820571 |
| DAC34640037 | DAC38725716/33 | DAC42720038 | DAC45805710 | DAC39740039ABS | DAC52910040ABS | DU47850045 |
| DAC34660037 | DAC38730040 | DAC42720038/35 | DAC45830045 | DAC40740040ABS | DAC52960050ABS | DU47880055 |
| DAC34670037 | DAC38740040 | DAC42720052/48 | DAC45840039 | DAC4571037ABS | DAC54900050ABS | DU49840048 |
| DAC35618040 | DAC38745716/33 | DAC42750037 | DAC45840040 | DAC4571039ABS | DAC54920050ABS | DU5571051 |
| DAC35620040 | DAC38740036 | DAC42760033 | DAC45840045 | DAC40780040ABS | DAC54950048ABS | DU54960051 |
| DAC35640037 | DAC38740050 | DAC42760038/35 | DAC45840041/39 | DAC408457197ABS | DAC54980050ABS | DU55900054ABS |
| DAC35650035 | DAC38760043 | DAC42760039 | DAC45840041 | DAC40840640/39ABS | DAC54960051 | DU55900055 |
| DAC35650037 | DAC38790045 | DAC42760040/37 | DAC45840042/40 | DAC42770039ABS | DU25520037 | DU55900060 |
| DAC35660032 | DAC38800036/33 | DAC42780040 | DAC45840048 | DAC42800039ABS | DU25550043 | U399-U360L |
| DAC35660033 | DAC39680037 | DAC42780045 | DAC45850041 | DAC42800045ABS | DU25550045 | U298-U261L |
| DAC35660037 | DAC3968571 | DAC42770039 | DAC45860045 | DAC42820036ABS | DU25550048 | U497/U460L |
| DAC35670042 | DAC39720037 | DAC42800036/34 | DAC45880039 | DAC42820042ABS | DU25600045 | |
| DAC35685713/30 | DAC39740036/34 | DAC42800036 | DAC45880045 | DAC42825037ABS | DU25620048 | |
| DAC35680039/36 | DAC39740039 | DAC42800037 | DAC45870041/39 | DAC43780044ABS | DU26520037 | |
| DAC35680037 | DAC39/41750037 | DAC42800038 | DAC47810053 | DAC43790041/38ABS | DU26520041 |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Body: | Ball Bearings |
|---|---|
| The Number of Rows: | Double |
| Material: | Bearing Steel |
| Spherical: | Non-Aligning Bearings |
| Separated: | Unseparated |
| Quality: | Normal |
| Customization: |
Available
| Customized Request |
|---|
Are there specific considerations for choosing plastic bearings in applications with high-speed or high-temperature requirements?
Yes, there are specific considerations for choosing plastic bearings in applications with high-speed or high-temperature requirements. Here’s a detailed explanation:
- 1. High-Speed Considerations:
When selecting plastic bearings for high-speed applications, several factors need to be considered:
- a. Material Selection:
The choice of plastic material is crucial for high-speed applications. Certain plastics, such as PEEK (Polyether Ether Ketone) or PTFE (Polytetrafluoroethylene), offer excellent mechanical properties and low friction characteristics, making them suitable for high-speed operation. These materials have good dimensional stability, high strength, and low coefficients of friction, which minimize heat generation and reduce the risk of premature failure at elevated speeds.
- b. Cage Design:
The cage design plays a vital role in high-speed applications. A cage with low mass and optimal geometry can reduce centrifugal forces and minimize the risk of cage instability or cage-to-rolling-element contact at high speeds. Cages with designs that promote efficient lubricant distribution and minimize friction are also beneficial for high-speed operation.
- c. Lubrication:
Proper lubrication is critical for high-speed applications. The lubricant helps reduce friction, dissipate heat, and provide a protective film between the rolling elements and the bearing surfaces. Synthetic lubricants with high viscosity index and low evaporation rates are typically used in high-speed plastic bearings to ensure sufficient lubrication and reduce the risk of lubricant breakdown or loss at elevated speeds.
- d. Temperature Control:
High-speed applications can generate significant heat due to friction and internal forces. Adequate temperature control measures, such as cooling systems or heat dissipation techniques, should be considered to prevent excessive heat buildup. The selection of plastic materials with good thermal conductivity and resistance to temperature extremes can also help in managing high temperatures in high-speed applications.
- 2. High-Temperature Considerations:
When choosing plastic bearings for high-temperature applications, the following factors should be taken into account:
- a. Temperature Resistance:
Plastic materials exhibit varying degrees of temperature resistance. It is essential to select plastic bearings made from materials that can withstand the anticipated operating temperatures without significant degradation or loss of mechanical properties. High-temperature plastics such as PEEK, PPS (Polyphenylene Sulfide), or PI (Polyimide) are commonly used in applications with elevated temperatures.
- b. Lubrication:
Choosing the right lubricant is crucial for high-temperature applications. Lubricants with high-temperature stability and resistance to oxidation are required to ensure effective lubrication and prevent lubricant breakdown or evaporation at elevated temperatures. Specialized high-temperature lubricants, such as synthetic oils or greases, are commonly used in plastic bearings for high-temperature applications.
- c. Clearance and Expansion:
Plastic materials can exhibit thermal expansion properties that differ from metals. It is important to consider the coefficient of thermal expansion of the plastic bearing and its components to ensure proper clearance and prevent interference or binding at high temperatures. The selection of materials and the design of the bearing should account for the anticipated thermal expansion to maintain optimal performance and prevent damage.
- d. Ventilation and Heat Dissipation:
High-temperature applications require adequate ventilation and heat dissipation mechanisms to prevent excessive heat buildup. The design of the equipment or machinery housing should facilitate proper airflow and heat transfer to maintain the bearing’s temperature within acceptable limits. Additionally, incorporating cooling systems or heat sinks may be necessary in extreme high-temperature conditions.
In summary, choosing plastic bearings for high-speed or high-temperature applications requires careful consideration of factors such as material selection, cage design, lubrication, temperature resistance, clearance and expansion, and heat dissipation. By taking these specific considerations into account, manufacturers can ensure the optimal performance, reliability, and durability of plastic bearings in applications with high-speed or high-temperature requirements.
How do innovations and advancements in plastic bearing technology impact their use?
Innovations and advancements in plastic bearing technology have a significant impact on their use across various industries. Here’s a detailed explanation:
- 1. Enhanced Performance:
Advancements in plastic bearing technology have led to improved performance characteristics. Innovations in materials, manufacturing processes, and design techniques have resulted in plastic bearings that offer enhanced load capacity, reduced friction, improved wear resistance, and increased durability. These advancements allow plastic bearings to be used in a broader range of applications and environments where they previously may have been limited.
- 2. Expanded Application Range:
The advancements in plastic bearing technology have expanded their application range. With improved performance and the ability to withstand demanding operating conditions, plastic bearings can now be utilized in industries and applications that were traditionally dominated by metal bearings. They can be found in industries such as automotive, food processing, medical devices, electronics, renewable energy, and many others where their unique properties and benefits are highly valued.
- 3. Cost Savings:
Innovations in plastic bearing technology have brought about cost savings for industries. Plastic bearings often have lower production costs compared to metal bearings, and their lightweight nature can lead to reduced energy consumption in certain applications. Additionally, plastic bearings may eliminate the need for external lubrication, reducing maintenance costs and downtime. These cost-saving advantages make plastic bearings an attractive option for industries seeking efficient and economical solutions.
- 4. Corrosion and Chemical Resistance:
Advancements in plastic bearing technology have addressed the challenges of corrosion and chemical resistance. Newer plastic materials and formulations offer excellent resistance to a wide range of corrosive substances, acids, solvents, and aggressive chemicals. This makes plastic bearings suitable for industries where exposure to harsh environments or aggressive media is common, such as chemical processing, wastewater treatment, or marine applications.
- 5. Noise and Vibration Reduction:
Innovations in plastic bearing technology have led to the development of bearings with improved noise and vibration reduction capabilities. This is particularly beneficial in industries where noise and vibration can negatively impact performance, precision, and user comfort. Plastic bearings with advanced designs and dampening properties help minimize noise and vibration, making them suitable for applications such as electric motors, household appliances, or medical equipment.
- 6. Sustainability and Environmental Considerations:
Advancements in plastic bearing technology have also focused on sustainability and environmental considerations. Newer plastic materials may be recyclable or made from recycled content, reducing the environmental impact. Additionally, plastic bearings often require less lubrication compared to metal bearings, resulting in lower consumption of lubricants and reduced environmental contamination. These sustainable aspects align with the growing demand for eco-friendly solutions in various industries.
In summary, innovations and advancements in plastic bearing technology have a significant impact on their use. These advancements result in enhanced performance, expanded application range, cost savings, improved corrosion and chemical resistance, noise and vibration reduction, and sustainability considerations. As plastic bearing technology continues to evolve, industries can benefit from these advancements by adopting plastic bearings that offer superior performance, reliability, and efficiency in their specific applications.
What are the common types of plastic materials used for plastic bearings, such as PTFE or nylon?
Plastic bearings can be made from various types of plastic materials, each offering unique properties and advantages. Here are some common types of plastic materials used for plastic bearings:
- 1. PTFE (Polytetrafluoroethylene):
PTFE is a widely used plastic material for bearings due to its excellent low friction and self-lubricating properties. PTFE bearings have a low coefficient of friction, which reduces wear and energy consumption. They can operate without additional lubrication, making them suitable for applications where lubrication is challenging or undesirable. PTFE bearings also have high chemical resistance and can withstand a wide temperature range.
- 2. Nylon (Polyamide):
Nylon is another common plastic material used for bearings. It offers good wear resistance, low friction, and high strength. Nylon bearings can handle moderate loads and have self-lubricating properties. They are also resistant to chemicals and have excellent dimensional stability. Nylon bearings are often used in applications such as conveyor systems, automotive components, and machinery.
- 3. POM (Polyoxymethylene):
POM, also known as acetal or Delrin, is a versatile engineering plastic used in bearings. POM bearings have low friction, high wear resistance, and good dimensional stability. They exhibit excellent strength and stiffness, making them suitable for applications with moderate loads. POM bearings are often used in industries such as automotive, electronics, and consumer goods.
- 4. UHMWPE (Ultra-High Molecular Weight Polyethylene):
UHMWPE is a plastic material known for its exceptional wear resistance and impact strength. UHMWPE bearings can withstand heavy loads, have a low coefficient of friction, and offer good chemical resistance. They are often used in applications where high abrasion resistance and durability are required, such as in material handling equipment, conveyor systems, and agricultural machinery.
- 5. PEEK (Polyetheretherketone):
PEEK is a high-performance plastic material with excellent mechanical properties and temperature resistance. PEEK bearings can operate at high temperatures, making them suitable for applications in demanding environments. They offer low friction, good chemical resistance, and high strength. PEEK bearings are commonly used in aerospace, automotive, and medical applications.
These are just a few examples of the plastic materials used for plastic bearings. Other plastic materials, such as polyimide, PPS (polyphenylene sulfide), or PVDF (polyvinylidene fluoride), can also be used depending on the specific application requirements. The choice of plastic material for a plastic bearing depends on factors such as load capacity, temperature range, chemical compatibility, and friction characteristics.
editor by CX 2024-03-23
China OEM 6206 Full / Hybrid Ceramic Bearings, Plastic Bearings bearing assembly
Product Description
| Product name | High Quality full Ceramic Bearings bearing ceramic ball bearing |
| Type | |
| Structure | Ceramic Bearings |
| Material | Ceramic Bearings |
| Delivery time | 5-15days depends on quantity needed |
| Service | OEM service, according to customer requirements. |
| Quality | Large bearing capacity, high speed, low noise. |
Company Profile
In order to meet the needs of the masses of customers and improve the market competitiveness of our company,
we can provide OEM service according to our customers′ Needs. We have gained ISO9001 certificate, CE certificate,
GOST certificate and SGS certificate. Our target is to carry out the strategic investment along with the development
of market and need of new products. With our strategic, excellent products, top technology and outstanding service,
we sincerely expect cooperation with more customers and friends for a better future. Our main products include
spherical roller bearing, deep groove ball bearings, cylindrical roller bearings, spherical roller bearings, needle roller
bearings, ball bearing units, water pump bearings, automobile bearing, linear motion bearing, oil-less bearings,
bush and self-lubricating bearings, and non-standard bearings. Also, we supply bearings to our domestic peeling
machine factory and the machine exported to India, Malaysia and Russia, no any complaint from customer until now.
“zero defect, zero complaints” as the quality objective.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a trading company specializing in exporting bearings.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the
goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge
Q.You provide free consultation service?
Yes, before, during and after order, anytime.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Element: | Single Row |
|---|---|
| Material: | Bearing Steel |
| Load Direction: | Axial Bearing |
| Rod End: | General |
| Model: | GEH |
| Application: | Engineering Hydraulic Cylinder, Water Conservancy Machinery |
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is the role of cage design and materials in plastic bearing performance and durability?
The role of cage design and materials in plastic bearing performance and durability is significant. Here’s a detailed explanation:
- 1. Guidance and Retention:
The primary role of a cage in a plastic bearing is to guide and retain the rolling elements, such as balls or rollers. The cage holds the rolling elements in position, ensuring proper spacing and alignment within the bearing. This guidance and retention function is crucial for maintaining smooth and efficient operation, preventing contact between rolling elements, and distributing loads evenly. The cage design plays a critical role in achieving optimal performance and durability by providing effective guidance and retention of the rolling elements.
- 2. Load Distribution:
The cage design and materials contribute to the load distribution within the bearing. The cage helps distribute the applied loads evenly to the rolling elements, preventing excessive stress on individual elements and minimizing the risk of premature failure. An efficient cage design ensures that the load is shared appropriately among the rolling elements, maximizing the bearing’s load-carrying capacity and enhancing its durability.
- 3. Friction and Heat Generation:
The cage design and materials also influence the friction and heat generation within the bearing. A well-designed cage minimizes friction between the rolling elements and the cage itself, reducing energy losses and heat generation. Additionally, the choice of cage material can impact the coefficient of friction and thermal conductivity. Optimal cage materials with low friction and good thermal properties can contribute to improved performance, lower operating temperatures, and increased durability of the plastic bearing.
- 4. Lubricant Retention:
Certain cage designs are specifically engineered to assist in lubricant retention within the bearing. The cage structure can create pockets or reservoirs that hold and distribute lubricating oil or grease to the rolling elements. This ensures a continuous and adequate supply of lubrication, reducing friction, wear, and the risk of premature failure. Proper lubricant retention facilitated by the cage design is essential for maintaining the performance and durability of plastic bearings.
- 5. Resistance to Harsh Environments:
The choice of cage material is crucial for ensuring the resistance of plastic bearings to harsh operating environments. Different cage materials offer varying degrees of resistance to chemicals, moisture, temperature extremes, and other environmental factors. Selecting the appropriate cage material that is compatible with the application’s operating conditions is essential to maintain the bearing’s performance and durability over time.
- 6. Durability and Service Life:
The cage design and materials significantly impact the overall durability and service life of plastic bearings. A well-designed cage that effectively guides and retains the rolling elements, distributes loads evenly, minimizes friction, and retains lubrication contributes to the bearing’s longevity. Additionally, using durable and suitable cage materials that can withstand the operating conditions ensures the bearing’s ability to withstand wear, fatigue, and other forms of degradation, resulting in extended service life.
In summary, the cage design and materials play a crucial role in the performance and durability of plastic bearings. The cage provides guidance, retention, and load distribution for the rolling elements, minimizes friction and heat generation, assists in lubricant retention, ensures resistance to harsh environments, and contributes to the overall durability and service life of the bearing. By considering the appropriate cage design and materials, manufacturers can optimize the performance, reliability, and longevity of plastic bearings in various applications.
Can you explain the installation and alignment considerations for plastic bearings?
Proper installation and alignment are crucial for the optimal performance and longevity of plastic bearings. Here’s a detailed explanation of the installation and alignment considerations:
- 1. Clean and Dry Surfaces:
Before installing plastic bearings, it is important to ensure that the mating surfaces are clean and dry. Any dirt, debris, or moisture on the surfaces can affect the fit and performance of the bearings. Clean the surfaces thoroughly and remove any contaminants before proceeding with the installation.
- 2. Bearing Housing Preparation:
The bearing housing should be prepared to provide a proper fit for the plastic bearings. This may involve cleaning the housing, removing burrs or sharp edges, and ensuring that the housing is dimensionally accurate. The bearing housing should be free from any defects that could hinder the installation or affect the alignment of the bearings.
- 3. Proper Shaft and Bearing Fit:
It is essential to ensure the proper fit between the shaft and the plastic bearings. The shaft diameter should match the recommended tolerance range provided by the bearing manufacturer. If the fit is too loose, the bearings may slip or have excessive play, while a fit that is too tight can cause increased friction and premature wear. Follow the manufacturer’s guidelines for the recommended fit and tolerances.
- 4. Alignment:
Proper alignment is critical for the smooth operation of plastic bearings. Misalignment can lead to increased friction, premature wear, and reduced bearing lifespan. Ensure that the shaft and bearing housing are aligned concentrically and parallel to each other. Misalignment can be checked using alignment tools, such as dial indicators or laser alignment systems, and adjustments should be made accordingly to achieve the correct alignment.
- 5. Mounting and Fixing:
Plastic bearings should be securely mounted and fixed in the bearing housing. Follow the manufacturer’s instructions for the appropriate mounting method, which may involve press-fitting, snap-fitting, or other techniques. Use the recommended tools or equipment to ensure a proper and secure fit. Pay attention to any locking mechanisms or retaining devices that may be required to prevent the bearings from rotating or moving within the housing.
- 6. Lubrication:
Depending on the type of plastic bearings, lubrication requirements may vary. Some plastic bearings are self-lubricating and do not require additional lubrication, while others may benefit from a thin film of lubricant. Follow the manufacturer’s guidelines for the appropriate lubrication method and interval, if applicable, to ensure optimal performance and longevity of the bearings.
In summary, proper installation and alignment are essential for the effective functioning of plastic bearings. Considerations such as clean and dry surfaces, bearing housing preparation, proper shaft and bearing fit, alignment, secure mounting and fixing, and appropriate lubrication contribute to the successful installation and alignment of plastic bearings.
How do plastic bearings contribute to reduced friction and noise in machinery?
Plastic bearings play a significant role in reducing friction and noise in machinery. Here’s a detailed explanation of how plastic bearings contribute to these benefits:
- 1. Low Friction Coefficient:
Plastic bearings are designed to have low friction coefficients, which means they generate less resistance as the bearing surfaces slide or roll against each other. The low friction coefficient of plastic materials, such as PTFE (polytetrafluoroethylene) or nylon, helps minimize the amount of energy required to rotate or move the bearing. This reduction in friction results in several advantages, including lower power consumption, improved efficiency, and reduced wear on the bearing surfaces.
- 2. Self-Lubricating Properties:
Many plastic bearings have self-lubricating properties, which means they can operate effectively without the need for external lubrication. The plastic materials used in these bearings contain additives or solid lubricants that provide a thin film of lubrication between the bearing surfaces. This self-lubrication minimizes friction and wear, enhances the bearing’s performance, and reduces the need for regular lubrication maintenance. As a result, plastic bearings contribute to smoother operation and lower friction-related noise in machinery.
- 3. Damping Characteristics:
Plastic materials used in bearings often possess inherent damping characteristics. Damping refers to the ability of a material to absorb or dissipate vibrations and energy. Plastic bearings can effectively absorb vibrations generated during machinery operation, which helps reduce the transmission of vibrations to other parts of the system. This damping effect contributes to a quieter operation by minimizing the noise generated by machinery vibrations.
- 4. Reduced Metal-to-Metal Contact:
Plastic bearings create a barrier between metal surfaces, reducing direct metal-to-metal contact. This separation prevents or minimizes the occurrence of metal-to-metal friction, which can lead to increased noise levels. The plastic material acts as a cushioning layer, reducing the impact and noise generated by metal components rubbing against each other. By reducing metal-to-metal contact, plastic bearings contribute to quieter machinery operation.
- 5. Vibration Isolation:
Plastic bearings can help isolate and dampen vibrations within machinery. The elastic and damping properties of plastic materials allow them to absorb and dissipate vibrations, preventing them from propagating throughout the system. By isolating vibrations, plastic bearings help reduce the transmission of vibrations to other parts of the machinery, minimizing noise generation. This vibration isolation contributes to a quieter overall operation.
Overall, plastic bearings offer several advantages that contribute to reduced friction and noise in machinery. Their low friction coefficients, self-lubricating properties, damping characteristics, reduced metal-to-metal contact, and vibration isolation capabilities all work together to minimize energy losses, wear, and noise generation. However, it’s important to consider specific application requirements and consult manufacturers’ guidelines to ensure the appropriate selection and use of plastic bearings for optimal performance in machinery.
editor by CX 2024-03-07
China Hot selling Supply High Quality 6206 Full / Hybrid Ceramic Bearings, Plastic Bearings double row ball bearing
Product Description
| Product name | High Quality full Ceramic Bearings bearing ceramic ball bearing |
| Type | |
| Structure | Ceramic Bearings |
| Material | Ceramic Bearings |
| Delivery time | 5-15days depends on quantity needed |
| Service | OEM service, according to customer requirements. |
| Quality | Large bearing capacity, high speed, low noise. |
Company Profile
In order to meet the needs of the masses of customers and improve the market competitiveness of our company,
we can provide OEM service according to our customers′ Needs. We have gained ISO9001 certificate, CE certificate,
GOST certificate and SGS certificate. Our target is to carry out the strategic investment along with the development
of market and need of new products. With our strategic, excellent products, top technology and outstanding service,
we sincerely expect cooperation with more customers and friends for a better future. Our main products include
spherical roller bearing, deep groove ball bearings, cylindrical roller bearings, spherical roller bearings, needle roller
bearings, ball bearing units, water pump bearings, automobile bearing, linear motion bearing, oil-less bearings,
bush and self-lubricating bearings, and non-standard bearings. Also, we supply bearings to our domestic peeling
machine factory and the machine exported to India, Malaysia and Russia, no any complaint from customer until now.
“zero defect, zero complaints” as the quality objective.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a trading company specializing in exporting bearings.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the
goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge
Q.You provide free consultation service?
Yes, before, during and after order, anytime.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Rolling Element: | Single Row |
|---|---|
| Material: | Bearing Steel |
| Load Direction: | Axial Bearing |
| Rod End: | General |
| Model: | GEH |
| Application: | Engineering Hydraulic Cylinder, Water Conservancy Machinery |
| Samples: |
US$ 5/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What is the role of cage design and materials in plastic bearing performance and durability?
The role of cage design and materials in plastic bearing performance and durability is significant. Here’s a detailed explanation:
- 1. Guidance and Retention:
The primary role of a cage in a plastic bearing is to guide and retain the rolling elements, such as balls or rollers. The cage holds the rolling elements in position, ensuring proper spacing and alignment within the bearing. This guidance and retention function is crucial for maintaining smooth and efficient operation, preventing contact between rolling elements, and distributing loads evenly. The cage design plays a critical role in achieving optimal performance and durability by providing effective guidance and retention of the rolling elements.
- 2. Load Distribution:
The cage design and materials contribute to the load distribution within the bearing. The cage helps distribute the applied loads evenly to the rolling elements, preventing excessive stress on individual elements and minimizing the risk of premature failure. An efficient cage design ensures that the load is shared appropriately among the rolling elements, maximizing the bearing’s load-carrying capacity and enhancing its durability.
- 3. Friction and Heat Generation:
The cage design and materials also influence the friction and heat generation within the bearing. A well-designed cage minimizes friction between the rolling elements and the cage itself, reducing energy losses and heat generation. Additionally, the choice of cage material can impact the coefficient of friction and thermal conductivity. Optimal cage materials with low friction and good thermal properties can contribute to improved performance, lower operating temperatures, and increased durability of the plastic bearing.
- 4. Lubricant Retention:
Certain cage designs are specifically engineered to assist in lubricant retention within the bearing. The cage structure can create pockets or reservoirs that hold and distribute lubricating oil or grease to the rolling elements. This ensures a continuous and adequate supply of lubrication, reducing friction, wear, and the risk of premature failure. Proper lubricant retention facilitated by the cage design is essential for maintaining the performance and durability of plastic bearings.
- 5. Resistance to Harsh Environments:
The choice of cage material is crucial for ensuring the resistance of plastic bearings to harsh operating environments. Different cage materials offer varying degrees of resistance to chemicals, moisture, temperature extremes, and other environmental factors. Selecting the appropriate cage material that is compatible with the application’s operating conditions is essential to maintain the bearing’s performance and durability over time.
- 6. Durability and Service Life:
The cage design and materials significantly impact the overall durability and service life of plastic bearings. A well-designed cage that effectively guides and retains the rolling elements, distributes loads evenly, minimizes friction, and retains lubrication contributes to the bearing’s longevity. Additionally, using durable and suitable cage materials that can withstand the operating conditions ensures the bearing’s ability to withstand wear, fatigue, and other forms of degradation, resulting in extended service life.
In summary, the cage design and materials play a crucial role in the performance and durability of plastic bearings. The cage provides guidance, retention, and load distribution for the rolling elements, minimizes friction and heat generation, assists in lubricant retention, ensures resistance to harsh environments, and contributes to the overall durability and service life of the bearing. By considering the appropriate cage design and materials, manufacturers can optimize the performance, reliability, and longevity of plastic bearings in various applications.
Can you provide examples of machinery or equipment that rely on precision plastic bearings for efficient operation?
Precision plastic bearings are essential components in numerous machinery and equipment where efficient and reliable operation is crucial. Here are some examples of machinery and equipment that rely on precision plastic bearings:
- 1. Robotics and Automation Systems:
Precision plastic bearings are widely used in robotics and automation systems. These bearings provide smooth and precise movement in robotic arms, linear actuators, and automated assembly lines. They contribute to accurate positioning, repeatability, and high-speed operation, ensuring efficient and reliable performance in various industrial automation applications.
- 2. CNC Machines and Machine Tools:
CNC machines and machine tools, such as milling machines, lathes, and routers, rely on precision plastic bearings for smooth and accurate motion control. These bearings are used in linear guides, spindles, and ball screw assemblies. Precision plastic bearings enable precise positioning, reduce backlash, and contribute to high machining accuracy and efficiency.
- 3. Printing and Packaging Machinery:
Precision plastic bearings play a critical role in printing and packaging machinery. They are used in printing presses, label applicators, packaging equipment, and converting machines. These bearings provide smooth rotation and linear motion in rollers, guides, and feed systems. They help maintain precise registration, reduce downtime, and ensure efficient production in the printing and packaging industry.
- 4. Semiconductor and Electronics Manufacturing:
Precision plastic bearings are integral to semiconductor and electronics manufacturing equipment. They are used in wafer processing machines, pick-and-place machines, wire bonders, and inspection systems. These bearings contribute to precise positioning, smooth motion, and low particulate generation, ensuring efficient and reliable manufacturing processes in the semiconductor and electronics industry.
- 5. Optical and Imaging Systems:
Precision plastic bearings are found in optical and imaging systems, including cameras, scanners, microscopes, and telescopes. They provide smooth and stable movement in lens focusing mechanisms, stage positioning systems, and image stabilization mechanisms. Precision plastic bearings help achieve sharp and clear imaging, precise measurements, and efficient optical system operation.
- 6. Medical and Laboratory Equipment:
Precision plastic bearings are critical components in medical and laboratory equipment. They are used in centrifuges, pipetting systems, diagnostic devices, and analytical instruments. These bearings offer low friction, precise motion control, and resistance to chemicals and sterilization processes. Precision plastic bearings contribute to accurate sample handling, reliable test results, and efficient operation in medical and laboratory settings.
These examples highlight the diverse range of machinery and equipment that rely on precision plastic bearings for efficient operation. Precision plastic bearings are also used in textile machinery, aerospace systems, measuring instruments, and other applications where precise motion control, low friction, and reliable performance are essential.
What are the common types of plastic materials used for plastic bearings, such as PTFE or nylon?
Plastic bearings can be made from various types of plastic materials, each offering unique properties and advantages. Here are some common types of plastic materials used for plastic bearings:
- 1. PTFE (Polytetrafluoroethylene):
PTFE is a widely used plastic material for bearings due to its excellent low friction and self-lubricating properties. PTFE bearings have a low coefficient of friction, which reduces wear and energy consumption. They can operate without additional lubrication, making them suitable for applications where lubrication is challenging or undesirable. PTFE bearings also have high chemical resistance and can withstand a wide temperature range.
- 2. Nylon (Polyamide):
Nylon is another common plastic material used for bearings. It offers good wear resistance, low friction, and high strength. Nylon bearings can handle moderate loads and have self-lubricating properties. They are also resistant to chemicals and have excellent dimensional stability. Nylon bearings are often used in applications such as conveyor systems, automotive components, and machinery.
- 3. POM (Polyoxymethylene):
POM, also known as acetal or Delrin, is a versatile engineering plastic used in bearings. POM bearings have low friction, high wear resistance, and good dimensional stability. They exhibit excellent strength and stiffness, making them suitable for applications with moderate loads. POM bearings are often used in industries such as automotive, electronics, and consumer goods.
- 4. UHMWPE (Ultra-High Molecular Weight Polyethylene):
UHMWPE is a plastic material known for its exceptional wear resistance and impact strength. UHMWPE bearings can withstand heavy loads, have a low coefficient of friction, and offer good chemical resistance. They are often used in applications where high abrasion resistance and durability are required, such as in material handling equipment, conveyor systems, and agricultural machinery.
- 5. PEEK (Polyetheretherketone):
PEEK is a high-performance plastic material with excellent mechanical properties and temperature resistance. PEEK bearings can operate at high temperatures, making them suitable for applications in demanding environments. They offer low friction, good chemical resistance, and high strength. PEEK bearings are commonly used in aerospace, automotive, and medical applications.
These are just a few examples of the plastic materials used for plastic bearings. Other plastic materials, such as polyimide, PPS (polyphenylene sulfide), or PVDF (polyvinylidene fluoride), can also be used depending on the specific application requirements. The choice of plastic material for a plastic bearing depends on factors such as load capacity, temperature range, chemical compatibility, and friction characteristics.
editor by CX 2024-02-21
China OEM 65mm 6810 61810 hxhv precision ceramic bearings bearing distributors
Sort: CERAMIC BALL
Relevant Industries: Hotels, Garment Stores, Developing Content Stores, Manufacturing Plant, Equipment Fix Stores, Foods & Beverage Manufacturing unit, Farms, Restaurant, Home Use, Retail, Meals Shop, Printing Retailers, Building works , Vitality & Mining, Other, Promoting Firm
Product Number: 6810
Precision Rating: P0
OEM Provider: Customized bearing’s product nunber, dimension, emblem and Packing
Certificate: CE
Ring Content: Ceramic or stainless steel
Balls Materials: Ceramic Si3N4 or ZrO2
Retainer Materials: PTFE, PEEK, POM, PU or Nylon Retainer
Precision: P0 P6 P5 P4 P2
Radial Clearance: C2 C3 C4 C5
Vibration Acceleration: Z Z1 Z2 Z3 Z4
Vibration: V V1 V2 V3 V4
Lubrication: Unnecessary
Packaging Particulars: A: tube package deal+outer carton+pallets B: single box+outer carton+palletsC: According to your’s need
Port: ZheJiang or HangZhou or HangZhou
Items Description Attention:Make sure you get in touch with us for the closing cost with your precise need. Thank you.The unit value is impacted by bearing product amount, order quantity, content, bearing precision selection and so on.
| Product Name | OEM 65mm 6810 61810 hxhv precision ceramic bearings | |
| Bearing’s Variety | Ceramic Ball Bearing | |
| Model Amount | 6810 | |
| 6810 bearing proportions | ||
| Bore Diameter | 50 mm / 1.77165 inch | |
| Outer Diameter | 65 mm / 2.55906 inch | |
| Width / Thickness | 7 mm / .11811 inch | |
| Weight | 0.052 kg / . 0571 1 lb | |
What you should know about bushings
If you are in the market for a casing, there are a few things you should know before buying. First, a bushing is a mechanical part with a rotating or sliding shaft part. You can find them in almost all industrial applications due to their excellent load-carrying capacity and anti-friction properties. They are especially important in construction, mining, agriculture, hydropower, material handling, and more.
Casing application
The casing market is mainly driven by the growth of the power generation industry. The increasing electrification of Asia Pacific and the deployment of renewable energy in countries such as Saudi Arabia and the UAE are driving the demand for distribution transformer bushings. In addition, the demand for bushings in Western Europe is also likely to increase with the spread of renewable energy and the installation of electric vehicle charging infrastructure. However, the market in Asia Pacific is expected to remain small compared to the rest of the world.
Although bushings are relatively expensive, they are very durable and cost-effective. Furthermore, bushings have a variety of applications, making them an important component in power transformers. For example, power transformers often use bushings to achieve relative movement by sliding or rolling. The vehicle suspension system also uses rubber bushings for a smooth ride and rotating bushings for machine-related operations. They require precision machined parts and are especially useful in applications where high loads and friction must be controlled. Also, plastic bushings are used for wheels in dry kilns, where lubrication is often troublesome.
Transformers require constant monitoring, which is one of the reasons bushings are so important in power transformers. Any failure of these components could result in the total loss of the transformer and all surrounding equipment. To maintain high system reliability, utilities must monitor insulation in and around bushings, especially if transformers have been in use for decades. Some utilities have made monitoring the condition of their transformers an important part of their smart grid plans.
Material
The core of the dry casing has many material interfaces. The discharge most likely originates near the edges of the foils and can cause electrical tree growth or breakdown between adjacent foils. Several studies have investigated interfacial effects in composite insulating materials and concluded that the conditions under which the interface occurs is a key factor in determining the growth of electrical trees. This study found that material type and interface conditions are the two most important factors for the growth of electrical trees.
Bushings can be made of many different materials, depending on their purpose. The main purpose of the bushing is to support the assembly while protecting it. They must be stiff enough to support the load placed on them, and flexible enough to protect the shaft. Since the shaft is usually not centered on the bushing during rotation, the bushing must be durable enough to carry the load while still protecting the shaft. Here are several materials used for bushings:
A stabilizer bar assembly is a good example of pre-assembly. This pre-assembly enables the vehicle assembly plant to receive components ready for vehicle assembly. The prior art requires the vehicle assembly plant to separate the bushing from the stabilizer bar. However, the present invention eliminates this step and provides a mechanically rigid stabilizer bar assembly. It is designed to prevent audible squeals and improve vehicle performance and handling.
Hardened steel bushings are ideal for pivot and low speed applications. They are made of high carbon steel and fully hardened to 56-62 HRC. Bronze bushings require daily or weekly lubrication but are more expensive than plastic bushings. Plastic bushings are low cost, low maintenance, self lubricating and do not require regular lubrication. These are also suitable for applications with hard to reach parts.
application
Bushings have many applications in various industries. Most of the time, it is used for drilling. Its excellent chemical and mechanical properties can be used to protect various equipment. These components are versatile and available in a variety of materials. All sleeves are packaged according to national and international standards. They are used in many industrial processes from construction to drilling. Some application examples are listed below.The component 10 may contain a tank for a liquid such as fuel, and the object 12 may be made of fiber reinforced composite material. Sleeve assembly 16 is configured to ground component 10 and object 12 . It may be a bulkhead isolator 40 used to isolate electrical charges in aircraft hydraulic lines. Bushing assembly 16 is one of many possible uses for the bushing assembly. The following examples illustrate various applications of bushing assemblies.
Bearings are devices used to reduce friction between moving surfaces. They are a good choice for many applications as they are maintenance free and extend the life of machine components. They can be used in a variety of applications and are often used with plastic and metal materials. For example, Daikin offers bronze and brass bushings. Bushings have many other uses, but they are most commonly used in machines, especially when used in low-load environments.
The most common application for bushings is drilling. Swivel bushings can be used in almost any drilling application. For more complex applications, CZPT’s engineering department can create special designs to your specifications. The applications of bushings in machining centers are endless. By providing a smooth, reliable interface, bushings are an excellent choice for precision machining. They can also provide current paths.
Cost
When you have a vehicle that needs a bushing replacement, you may be wondering about the cost of a bushing replacement. The fact is, the cost of a bushing replacement will vary widely, depending on the specific car model. Some cars cost as little as $5, while other vehicles can cost up to $300. The replacement of a control arm bushing may not cost that much, but it’s important to know that it’s a relatively expensive part to replace.
Most mechanics charge around $375 for a job that involves replacing the bushing in a control arm. However, this price range can vary significantly, depending on whether the mechanic uses OE or aftermarket parts. In any case, the cost of labor is typically included in the price. Some mechanics may even include a labor charge, which is an additional cost. In general, however, the cost of a control arm bushing replacement is comparable to the cost of replacing a single bushing.
Control arm bushings are made of two metal cylinders secured together by a thick layer of rubber. Over time, these parts can deteriorate due to accidents, potholes, and off-roading. For this reason, it is important to replace them as soon as possible. Bushing replacement can save you money in the long run, and it’s important to have your vehicle repaired as soon as possible. If your control arm bushing is showing signs of wear, you should have it replaced before it becomes completely useless.
If you have decided to replace your suspension bushing yourself, the cost will be considerably lower than you would spend on the replacement of other components. If you have a mechanically-inclined mechanic, you can do it yourself. The parts and labour are reasonably cheap, but the most expensive part is the labor. Because it requires disassembling the wheel and suspension and installing a new bushing, it is important to have a mechanic who has a good understanding of vehicle mechanicry. The cost for control arm bushing replacement is between $20 and $80 per bushing, and a set of four costs approximately $300.
Disambiguation
If you’ve come across a page containing information about Bushing, you may have been looking for more information. This disambiguation page lists publications about the person, but these have not been assigned to him. We encourage you to contact us if you know who the true author of these publications is. Nevertheless, if you’re searching for specific information about Bushing, we recommend you start with CZPT.
editor by czh 2023-02-19
China Manufacturer 62mm 6007 6107 6206 6305 6403 6506 hxhv cleaning ceramic bearings bearing and race
Sort: CERAMIC BALL
Relevant Industries: Resorts, Garment Retailers, Constructing Substance Outlets, Manufacturing Plant, Equipment Restore Outlets, Foodstuff & Beverage Factory, Farms, Cafe, Property Use, Retail, Food Store, Printing Retailers, Design works , Strength & Mining, Other, Promoting Business
Product Quantity: 6007
Precision Ranking: P0
OEM Service: Customized bearing’s model nunber, dimension, brand and Packing
Certificate: CE
Ring Material: Ceramic or stainless steel
Balls Substance: Ceramic Si3N4 or ZrO2
Retainer Substance: PTFE, PEEK, POM, PU or Nylon Retainer
Precision: P0 P6 P5 P4 P2
Radial Clearance: C2 C3 C4 C5
Vibration Acceleration: Z Z1 Z2 Z3 Z4
Vibration: V V1 V2 V3 V4
Lubrication: Needless
Packaging Details: A: tube bundle hxhv cleansing ceramic bearings
Bushing Application, Type and Compression Capability
Bushings are cylindrical bushings used in machinery. It prevents wear of moving parts and is often used as an enclosure. Bushings are also known as plain bearings or sleeve bearings. You may be wondering what these parts do and how they work, but this article aims to answer all your questions. We’ll cover bushing applications, types and compression capabilities so you can choose the right one for your needs.
application
A bushing is a mechanical component that plays an important role in many different fields. In addition to being very practical, it helps reduce noise, vibration, wear and provides anti-corrosion properties. These properties help mechanical equipment in various ways, including making it easier to maintain and reducing its overall structure. The functionality of an enclosure depends on its purpose and environment. This article will discuss some of the most common applications of casing.
For example, in an aircraft, the bushing assembly 16 may be used for the bulkhead isolator 40 . The bushing assembly 16 provides the interfaces and paths required for current flow. In this manner, the sleeve assembly provides a secure, reliable connection between two objects with different electrical charges. They also prevent sparking by increasing the electrical conductivity of the component and reducing its resistivity, thereby minimizing the chance of spark formation.
Another common application for bushings is as a support shaft. Unlike bearings, bushings operate by sliding between two moving surfaces. As a result, they reduce friction and handling stress, reducing overall maintenance costs. Typically, the bushing is made of brass or bronze. The benefits of bushings are similar to those of bearings. They help extend the life of rotating machines by reducing frictional energy loss and wear.
In addition to identifying growth opportunities and minimizing risks, the Bushing Anti-Vibration Mounts Market report provides insights into the dynamics of the industry and its key players. The report covers global market size, applications, growth prospects, challenges and regional forecasts. The detailed section on Bushing Anti-Vibration Mounts industry provides insights on demand and supply along with competitive analysis at regional and country level.
type
There are several types of bushings. Among them, the SF6 insulating sleeve has the simplest structure and is based on composite hollow insulators. It also has several metal shielding cylinders for regulating the electric field within the enclosure and another for grounding the metal shield. In addition to being lightweight, this sleeve is also very durable, but the diameter of its shield electrode is very large, which means special installation and handling procedures are required.
Linear bushings are usually pressed into the bore of the shaft and provide support as the shaft moves in/out. Non-press-fit bushings are held in place by snap rings or pins. For certain applications, engineers often choose bushings over bearings and vice versa. That’s why. Below are some common bushing types. If you need to buy, make sure you know how to tell them apart.
OIP bushings are used for oil-filled cable boxes, and oil-to-oil bushings are used for EHV power transformers. The main components of the OIP enclosure are shown in Figure 7a. If you are considering this type of bushing for your specific application, you need to make sure you understand your specific requirements. You can also consult your local engineering department for more information.
All types of bushings should be tested for IR and capacitance. The test tap should be securely attached to the bushing flange. If damaged bushings are found, replace them immediately. Be sure to keep complete records of the enclosure for routine maintenance and any IR testing. Also, be sure to pay attention to tan d and thermal vision measurements.
Compressive ability
There are several things to consider when choosing an enclosure. First, the material. There are two main types of bushings: those made of filled Teflon and those made of polyester resin. The former has the highest compressive strength, while the latter has a lower compressive capacity. If you need small amounts, glass-filled nylon bushings are the most common and best option. Glass-filled nylon is an economical material with a compressive strength of 36,000 lbs.
Second, the material used for the enclosure must be able to withstand the load. For example, bronze bushings can cause metal shavings to fall into the papermaking process. CG materials can withstand very high levels of moisture, which can damage bushings that require lubrication. Additionally, these materials can operate for extended periods of time without lubrication. This is particularly advantageous in the paper industry, since the casing operates in a humid environment.
In addition to the material and its composition, other characteristics of the enclosure must also be considered, including its operating temperature. Although frictional heat from moving loads and the temperature of the bushing itself can affect the performance of the bushing, these factors determine its service life. For high temperature applications, the PV of the enclosure should be kept low. On the other hand, plastic bushings are generally less heat resistant than metal bushings. In addition, plastic sleeves have a high rate of thermal expansion. To avoid this, size control is also important.
Low pressure bushings have different requirements. An 800 MVA installation requires a low voltage bushing rated at 14 000 A. The palm assembly of the transformer also features a large central copper cylinder for electrical current. The bushing must withstand this amount of current and must maintain an even distribution of current in the transformer tank. If there is a leak, the bushing must be able to resist the leak so as not to damage the transformer.
cost
The cost of new control arm bushings varies widely. Some parts are cheaper than others, and a new part is only $200. However, if you replace the four control bushings in your car, the cost can exceed $1,200. The cost breakdown for each section is listed below. If you plan to replace all four, the cost of each bushing may range from $200 to $500.
The control arm bushing bears the brunt of the forces generated by the tire and is parallel to the direction of the force. However, over time, these components wear out and need to be replaced. Replacing one control arm bushing costs between $300 and $1,200. However, the cost of replacing each arm bushing depends on your car model and driving habits. The control arm bushings should last about 100,000 miles before needing replacement.
The repair process for control arm bushings is time consuming and expensive. Also, they may need to remove the heat shield or bracket. In either case, the procedure is simple. Stabilizer bar brackets are usually attached with one or two mounting bolts. They can also be secured with nuts or threaded holes. All you need is a wrench to remove them.
The control arm bushings are made of two metal cylinders and a thick rubber bushing. These parts can deteriorate from potholes, off-roading or accidents. Because they are made of rubber, the parts are more expensive than new. Buying used ones can save you money because you don’t need to install them yourself. However, if you do plan on fixing a luxury car yourself, be sure to find one that has a warranty and warranty.
maintain
To prevent your vehicle from overheating and leaking oil, a properly functioning bushing must be used. If the oil level is too low, you will need to check the mounting bolts to make sure they are properly tightened. Check gasket to ensure proper compression is applied, replace bushing if necessary. You should notify your vehicle manufacturer if your vehicle is immersed in oil. Whenever an oil leak occurs, it is very important to replace the oil-filled bushing.
Another important aspect of bushing maintenance is the detection and correction of partial discharges. Partial discharge is caused by current entering the bushing. Partial discharge can cause tree-like structures, cracks and carbonization in the discharge channel, which can eventually damage the casing. Early detection of these processes is critical to ensuring that your vehicle’s bushings are properly maintained. Identifying and repairing partial discharges is critical to ensuring optimal operation, regardless of the type of pump or motor.
To diagnose casing condition, perform several tests. You can use tan d measurement, which is a powerful tool for detecting the ingress of water and moisture. You can also use power factor measurements to detect localized defects and aging effects. You can also check the oil level by performing an infrared check. After completing these tests, you will be able to determine if there is enough oil in the casing.
If the oil level in the transformer is too low, water and air may leak into the transformer. To avoid this problem, be sure to check the MOG and transformer oil levels. If the silicone is pink, replace it. You should also check the function of the oil pump, fan and control circuits annually. Check the physical condition of the pump and fan and whether they need to be replaced. Clean the transformer bushing with a soft cotton cloth and inspect for cracks.
editor by czh 2023-02-19
China Hybrid Ceramic Ball Bearing abec 9 4x10x4 ceramic bearing bearing air
Type: BALL, Hybrid Ceramic Ball Bearing abec 9 4x10x4 ceramic bearing
Framework: Deep Groove
Applicable Industries: Building Materials Shops, Manufacturing Plant, Machinery Restore Retailers, House Use, Retail
Bore Size: 4 – 50 mm
Design Quantity: SMR104C-2RS
Precision Score: ABEC-9
Seals Variety: ZZ 2RS Open
Number of Row: Single row
Bearing Model: SMR104C-2RS
Bearing Materials: AISI440C stainless steel
Balls Content: Si3N4
Bearing ID: 4mm
Bearing OD: 10mm
Bearing Width: 4mm
Lubrication: Dry/ Grease/Oil
Characteristic: Large Pace, Reduced Sound
Bearing Functions: Deep groove
Packaging Specifics: Hybrid Ceramic Ball Bearing Abec 7 3x10x4 4x10x4 Fishing Reel Bearing 10pcs/tube White box
| Product Name | Hybrid Ceramic Ball Bearing abec 9 4x10x4 ceramic bearing |
| Model | Neutral, can custom your personal symbol |
| Model No | SMR104C |
| Measurements(mm) | 4x10x4mm |
| Content | AISI440C stainless steel+Si3N4 ceramic balls |
| Sealed Sort | 2RS rubber seals/ ZZ metal shields/Open up |
| Precision | ABEC-7 quality |
| Sounds stage | Z2,Z3 |
| Used | Hybrid Ceramic Ball Bearing abec 9 4x10x4 ceramic bearing |
| Packing | 10pcs/tube+White small box+Carton+Pallet |
| Shipping Technique | By air express or by sea |
ZOTY Fishing Reel Ceramic Ball Bearings
Higher quality hybrid ceramic bearing use for fishing reels, It best suit for famous manufacturers like Okuma, Abu, Daiwa, Shimano…reels. regardless of whether you are a competitive or leisure fisherman, or do reel mend routine maintenance provider, you have to know that the major objective of ball bearings is to reduce friction, produce relieve of motion, and improve velocity when fishing. Collectively, this primarily signifies that ball bearings make your fishing reel less complicated to use and a lot more effective.
With no Orange seals hybrid ceramic ball bearings, it would be significantly more challenging to cast and retrieve your line.Here, Zoty fishing ball bearing has designed a popularity as the 1 of the very best fishing bearings and have turn out to be the quantity 1 choice for fishermen in the internationally.
Our very polished stainless steel raw materials development with Si3N4 ceramic balls, 60mm 200W 300W 400W DC motor forty eight volt Brushless Motor NEMA24 BLDC Motor and proprietary precision inner tolerances is blended with our 100% synthetic lightweight Created in China which is super slippery and bonds to the bearing surfaces resulting in a really quick spinning bearing and reel. Also very appropriate for fishing reels and wet applications.Quicker means you can solid your reel farther and faster.The base linebuy a fishing reel with sufficient good quality bearings that will execute effectively and be trustworthy sustain it well…and go fishing.
For reel bearing’s internal bore dimensions above 8mm, remember to locate the dimensions in there:
Huge size ceramic bearings
Item UsesWhy Pick our Hybrid Ceramic Ball Bearing abec 9 4x10x4 ceramic bearing ?
one. AISI440C stainless metal races
2. AISI304 stainless metal cage/ Nylon cage
3. Si3N4 ceramic balls
four. Dry lube/ Oil
5. Orange rubber seals/ZZ metal shields/ Open up
6. Substantial velocity, rustproof and corrosion resistance
7. Minimal friction
eight. Long spin time, durable
9. Straightforward to upkeep
Renowned brand names fishing reels as pursuing:
Abu Garcia Reels, Abu Garcia Rods, REVO, Orra, Veritas
Exact Fishing Reels – Home of Little Reels, Big Fish
Alvey Fishing Reels
Browning Fishing X-Bolt Baitcast Reel
Butterworth Fishing Rod & Reel
Daiwa BG SPINNING REELS
Duro Hose Reel, Cord Reel & Cable Reel Manufacturer
Penn Saltwater Fishing Reels, Saltwater Fishing Rods
Pinnacle Casting Reels
Professional Gear Reels
Quantum Fishing Reels
…..others brand names of reels
Customer Suggestions
Organization Information
HangZhou Zoty Bearing Co., Ltd. started in 2008, manufacturing unit found in ZheJiang , and established up the sales place of work in HangZhou and Hongkong . Zoty integrates generation, Large quality bearing 16571 16571C3 6571MA 6571MAC3 6571 6571C3 6571-2RS1 6571-2RS1C3 trade, expenditure and income. We are getting the business to new heights that would have made our founder proud! Target on large top quality Deep Groove Ball Bearing, Miniature Bearing, Flanged Bearing, Stainless Steel Ball Bearings, Entire&hybrid Ceramic Ball Bearing and Plastic Roller Wheels.
Sells only the very best quality bearings of reduced sounds, minimal vibration, higher precision, high sealing overall performance, higher procedure overall performance, long doing work life, rustproof and corrosion resistance…ABEC-1, ABEC-3, ABEC-5, ABEC-7 and ABEC-9 grade bearings to satisfy the different client’s wants.
Commonly employed in the fields of home appliances, micro motor, R/C hobby, 6000-ZZ Deep groove ball bearing 6000 2Z 10x26x7mm 6000-2Z 6000 ZZ 6000ZZ fishing reels, fitness gear, healthcare equipment, precision instrument, textile machinery and tools….
Primary items and companies, including: Stainless Metal Ball Bearings, Deep Groove Ball Bearings, Miniature Ball Bearings, Flange Ball Bearings, Full Ceramic Ball Bearings, Thrust Bearings, Non-standard Bearings, Plastic Roller Wheels( Drawer Rollers & Plastic Bearing Rollers)We welcome you to investigate our site to learn all the approaches that
ZOTY BEARING can provider your demands at the greatest degree.
Packaging & Delivery
FAQQ1: Are you buying and selling organization or manufacturer?
A: We are factory. Zoty Industrial Co.,Ltd integrates production, trade, investment and product sales.
Q2: Can we do our symbol or brand on the bundle?A: Of course, we can do OEM and ODM.
Q3: How extended is your shipping time?
A: 3-5 functioning days.
Q4: Do you supply samples ? is it free of charge or extra?
A: Of course, we supply cost-free samples for customers check out quality, 608 627 ice inline Roller skate bearing transport price and tax pay by consumer.
Simply click For More
Hybrid Ceramic Ball Bearing abec 9 4x10x4 ceramic bearing
Types of Ball Bearings
There are many types of Ball Bearings available on the market, but which one is best for your application? Here, we will discuss the differences between Angular contact, Single-row, High-carbon steel, and Ceramic ball bearings. These types of bearings also feature races, or a groove in the center of each. These races are important in keeping the balls contained within the cylinder. They also provide a groove-baed pathway.
Ceramic
The ceramic ball used in ball bearings has many advantages. It is lightweight, operates at lower temperatures, has reduced skidding, and is resistant to electrolysis. The ball also exhibits longer fatigue life. All of these factors make the ceramic ball a good choice for many applications. But, how do you know if a ceramic ball bearing is right for your application? Read on to discover why ceramic ball bearings are a better choice than steel or stainless steel ones.
The ceramic balls are 40% more dense than steel. This means less centrifugal force is generated on the bearing, which suppresses heat generation. Because of this reduced friction, ceramic bearings are more efficient at transferring energy. Compared to steel bearings, ceramic balls have longer life spans. Nonetheless, these ceramic balls aren’t as strong as steel. Therefore, it is important to understand the limitations of the ceramic ball bearing before buying one.
The ceramic materials used for ball bearings are resistant to micro-welding. Metals undergo this process when imperfections in the surfaces interact. Eventually, this results in a brittle ball that reduces the life of a bearing. Unlike metals, ceramic materials have a stable behavior at high temperatures and exhibit less thermal expansion. This means that they can be used for applications where lubrication isn’t an option.
While steel balls can easily absorb contaminants and foreign particles, the ceramic ball is insensitive to this, and doesn’t require lubrication. This means they’re not susceptible to corrosion and other common problems. These are just a few reasons why ceramics are a better choice. This technology has a wide range of uses. It’s easy to see why it is so popular. If you’re looking for a new bearing for your application, be sure to contact an AST Applications Engineer. They can analyze your operating conditions and potential failure modes.
Angular contact
An Angular Contact Ball Bearing (also known as an angular-contact bearing) has an axial component that is generated when radial loads are applied. They are generally used in pairs, triplex sets, or quadruplex sets. These bearings are also available with Super Finished Raceways to reduce noise and improve lubricant distribution. Angular contact ball bearings have various design units, such as bore size, outer diameter, and outer ring width.
A single-row angular contact bearing has a radial contact angle that is equal to the angular distance between the two rings. Double-row angular bearings are designed for two-way thrust capability. These types of bearings can be purchased at Grainger and other online retailers. A typical angular contact bearing will last up to a million revolutions. They are often used in industrial angular contact bearings.
Single-row angular contact ball bearings feature a set contact angle. These bearings can support radial and axial loads, but they can’t withstand high speeds. Single-row angular contact ball bearings may also have one or two shoulders relieved. Thrust load is a pressure placed on the bearing when it is installed in an assembly, and it is used to create an angle between the races.
Angular contact ball bearings come in single and double-row configurations. They differ in the axial load they can carry and the type of lubrication they use. Angular contact ball bearings are ideal for high-speed applications and can accommodate both radial and axial loads. The type of contact and lubrication used in angular-contact ball bearings depends on the intended use for the bearing.
High-carbon steel
Carbon steel is a low-alloy and high-carbon steel used in bearings. This material provides superior strength and fatigue properties for ball and roller bearings. Its mechanical properties are ideal for applications where the temperature is less than 400 degrees Fahrenheit. High-carbon steel is also used to make bearing components for chrome steel bearings. These types of steels are softer than chrome steel but provide superior durability in applications where the material is exposed to severe conditions.
Hardened carbon steel balls with an AISI 1015 hardness index are used in a variety of automotive, commercial, and semi-precision applications. In addition to automotive applications, they are also used in slides, trolleys, and conveyors. AISI 1015 carbon steel balls are used in bearings. They can be purchased in a variety of weights and diameters. Carbon steel balls can also be purchased in nickel-plated or uncoated varieties for decorative purposes.
In order to determine whether a ball bearing is made of high-carbon steel, the material must be tested for its hardness. An ordinary pocket magnet will work well, but an ordinary rare earth magnet isn’t powerful enough to measure the hardness. If it attracts the magnet strongly, the metal is steel, while a weak magnet indicates a non-ferrous material. A hardness test requires a special microhardness test.
A lower-carbon steel is another option. Some miniature bearing manufacturers use a material with less carbon than AISI 440C. This material is also known as KS440 or X65Cr13. After being heat-treated, it develops smaller carbides, resulting in superior low-noise characteristics and the same corrosion-resistance as 440C. These materials are a less expensive alternative than chrome steel, but they are often less durable than chrome alloy steel.
Single-row
Single-row angular contact ball bearings accommodate axial loads in one direction. These are normally adjusted against a second bearing. Unlike other ball bearings, they are non-separable and contain an upper and lower shoulder. Single-row ball bearings are made of Chromium Steel (GCr15) which is heat-treated to achieve high uniform hardness and excellent wear resistance. They are the most commonly used type of bearings in the world.
Because of the angular contact between the radial plane and the raceway, single-row ball bearings transmit radial forces from raceway to raceway. A higher a, the greater the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are ideal for high axial loads. However, they have limited preload capabilities and must be installed in pairs. Hence, they are best used for applications where axial forces must be distributed.
Single-row ball bearings can be pre-lubricated and have steel shields. They are also available with rubber seals or snap rings on the outside edge. They are available with various retainers, including pressed steel cages, plastic shields, and rubber seals. A tapered bore is also available upon request. They are ideal for applications where space is limited. The 6200 series of bearings are especially well suited for electrical motors, dental hand tools, and optical encoders.
Single-row angular contact ball bearings are widely used for axial loads. The outer and inner rings have slightly larger radii than the balls. These bearings can accommodate high speeds and low torque. They can also be supplied with different grease levels. If grease is needed, you can choose a lubricant that has different characteristics depending on the application. They are easy to install and maintain. However, they are not recommended for adjacent mounting.
Plastic
A plastic ball bearing is a highly versatile component that can be mounted in a variety of components, including wheels, pulleys and housings. The outer ring of a plastic bearing is usually the pulley profile. The inner ring can be made of a shaft or polymer. The integrated design of a plastic ball bearing helps to reduce assembly time and cost. Here are some of the benefits of this type of bearing:
First and foremost, plastic balls are lighter than metal balls. They also have less magnetic properties than steel balls, making them the best option for applications requiring low weight and noise. Glass balls are also lighter than stainless steel balls, making them the ideal metal-free choice. They are also very corrosion-resistant, which makes them a great choice for some applications. In addition to being lightweight, polymer ball bearings are also quiet. And because of their low weight, plastic ball bearings are ideal for applications that require fast speed.
Another advantage of plastic bearings is their ability to withstand high temperatures. This material is also abrasion and corrosion-resistant. It meets FDA and USDA acceptance requirements. Aside from its abrasion-resistant and corrosion-resistant properties, these plastics do not transfer heat. Aside from being extremely durable and flexible, most plastics are also self-lubricating. Common plastics include phenolics, acetals, nylon, and ultra high molecular weight polyethylene. Nonetheless, plastics have limitations, and these materials may be damaged by extreme temperatures or cold flow under heavy loads.
Other advantages of plastic ball bearings include their low density, high hardness and low friction coefficient, and ability to withstand heat and corrosion. Ceramics are also lightweight, non-conductive, and have superior resistance to friction. These products can withstand temperatures up to 1,800 degrees Fahrenheit. If you’re in the market for a plastic ball bearing, it’s important to choose the right type of material. And if you’re looking for a high-quality bearing, look no further.
editor by czh 2023-02-19